Quote:
Originally Posted by cllp1975
the congestion on 2.4ghz band is so saturated, that achieving reasonable speeds is not likely
|
Have you checked this?
Download and run InSSIDer and check exactly what is on the 2.4GHz band in your area. You may find a sweet spot you can change channel to...
---------- Post added at 20:05 ---------- Previous post was at 19:57 ----------
Quote:
Originally Posted by dev
Always said and will continue to do so, if you want speed and reliability, used a wired connection.
|
I use 802.11g on a 20Mb connection and the lowest speed I get at all times is 19.5Mbit with average ping times of around 16ms. There is no problem with wireless speed and reliability if you get a good channel and a good UBR. Wired is loads better for LAN, but currently in the UK it makes sod all difference for cable WAN access.