[Peter_]

Originally Posted by Turkey Machine

I'd be a little worried about the downstream power level, also is that Downstream Frequency correct?

Downstream fine and frequency is an NTL one.

---------- Post added at 22:32 ---------- Previous post was at 22:31 ----------

Originally Posted by -Xt)2eM3-

Don't mean to steal the lime light but are my modem stats ok?

================================================== =========
Downstream Channel
The data shown in the table below provides information about the signal coming from the network to your cable modem.

Downstream Status
Operational
Channel ID
6
Downstream Frequency
331000000 Hz
Modulation
256QAM
Bit Rate
10240000 bits/sec
Power Level
0.5 dBmV
Signal to Noise Ratio
38.8 dB


Upstream Channel
The data shown in the table below provides information about the signal being transmitted to the network from your cable modem.

Upstream Status
Operational
Channel ID
3
Upstream Frequency
34000000 Hz
Modulation
16QAM
Bit Rate
512000 bits/sec
Power Level
44.5 dBmV
================================================== =======

Power levels are fine for an EX-Telewest 10Mb connection.