[telfordcable]

I am on 10Mb and had a ambit 256 modem and are these config ok ?

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 5
Downstream Frequency : 339000000 Hz
Downstream Modulation : QAM256
Downstream Symbol Rate : 5360.537 Ksym/sec
Downstream Interleave Depth : taps32Increment4
Downstream Receive Power Level : 10.3 dBmV
Downstream SNR : 41.2 dB

Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 2
Upstream Frequency : 34000000 Hz
Upstream Modulation : QAM16
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 35.5 dBmV
Upstream Mini-Slot Size : 2

Cable Modem Operation Configuration
Network Access : Allowed
Maximum Downstream Data Rate : 10240000
Maximum Upstream Data Rate : 512000
Maximum Upstream Channel Burst : 1600
Maximum Number of CPEs : 1
Modem Capability : Concatenation Enabled, Fragametation Enabled, PHS Disabled

Cable Modem Status
Item Status Comments
Acquire a Downstream Channel 339000000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational

getting a transfer rate of 1.19MB/sec on microsoft site and linux iso

Sun, 15 Mar 2009 23:19:53 UTC

Test 1: 1024K took 882 ms = 1161 KB/sec, approx 9567 Kbps, 9.34 Mbps
Test 2: 1024K took 858 ms = 1193.5 KB/sec, approx 9834 Kbps, 9.6 Mbps
Test 3: 1024K took 858 ms = 1193.5 KB/sec, approx 9834 Kbps, 9.6 Mbps
Test 4: 2048K took 1700 ms = 1204.7 KB/sec, approx 9927 Kbps, 9.69 Mbps

Overall Average Speed = approx 9791 Kbps, 9.56 Mbps