Thread: drivers
View Single Post
Old 05-03-2009, 11:43   #11
Stuart
-
 
Stuart's Avatar
 
Join Date: Jun 2003
Location: Somewhere
Services: Virgin for TV and Internet, BT for phone
Posts: 26,546
Stuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver bling
Stuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver blingStuart has a lot of silver bling
Re: drivers
How is the router connected? To connect a router to a VM cable modem, you need to do the following:
  1. Unplug the modem from the mains.
  2. Plug the Ethernet cable from the modem to the Internet/WAN port (on most routers, this port is seperate from the others) on the router.
  3. Power the modem up. Wait for the lights to settle.
  4. Power the router up.
  5. Connect one of the LAN ports on the router (there are normally four grouped together) to the Ethernet/LAN port on the PC.
  6. Power the PC up.
Stuart is offline   Reply With Quote