First i want to say i am impressed by the feedback of this forum.
That is pleasant and great.
Thank you everyone!
---------- Post added at 11:13 ---------- Previous post was at 11:12 ----------
Quote:
Originally Posted by DaiNasty
You may find Steve Gibson's article about multi-router systems interesting. You can use the NAT effect to create isolated subnets.
http://www.grc.com/nat/nats.htm |
That gives some light,
Thanks.
---------- Post added at 11:18 ---------- Previous post was at 11:13 ----------
Quote:
Originally Posted by Graham M
I would do it like this, it may work out more expensive but is probably the most stable solution:
Attachment 17082 |
Sound simple though.
---------- Post added at 11:28 ---------- Previous post was at 11:18 ----------
Quote:
Originally Posted by nffc
Routers connect one network to another so you'd have 2 routers DHCPing off the main router, with each of the other two routers on a different subnet DHCPing their clients.
Say you could give the main router 192.168.0.1, the two will be 0.1 and 0.2 on their WAN ports, and then 0.1 assigns itself 1.1 (on LAN) and clients 1.2>, 0.2 could assign itself 2.1 (on LAN) and clients 2.2> - if you get it.
|
To make it clear, does this solution give me the possibility to share internet with the cafe via dynamically assigned IPs on visitors computers?
As i mentioned in the first post, the office users must stay on static IPs, while using internet, and that way is the DSL Modem configured, as a router.
Thanks much.