Cable Forum - View Single Post

Dai · 18-08-2008, 00:23

WAN IP Address 0.0.0.0
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS IP 0.0.0.0
Secondary DNS IP 0.0.0.0

It appears that the router is not getting an IP address from the cable modem.

I'd say it's established that the link between your pc and router is working ok so the next thing I would suggest is a stepped power-cycle of the kit to see if you can get an IP for the router.

The usual routine. Power off everything. Then cable modem on first and wait for the lights to settle. Next the router ditto. Finally the pc.

Check this control panel again and see if the router has any IP in the WAN data.

18-08-2008, 00:23	#22
Dai Inactive Join Date: Dec 2006 Location: Lincoln UK Age: 76 Services: 50Mb, TV & Phone Posts: 3,673	Re: Problems with Dynamode router WAN IP Address 0.0.0.0 Subnet Mask 255.255.255.0 Default Gateway 0.0.0.0 Primary DNS IP 0.0.0.0 Secondary DNS IP 0.0.0.0 It appears that the router is not getting an IP address from the cable modem. I'd say it's established that the link between your pc and router is working ok so the next thing I would suggest is a stepped power-cycle of the kit to see if you can get an IP for the router. The usual routine. Power off everything. Then cable modem on first and wait for the lights to settle. Next the router ditto. Finally the pc. Check this control panel again and see if the router has any IP in the WAN data.