|
Re: Problems with Dynamode router
Hi David
i can get that control panel up with the firewall on and off. the info is as follows
wan status
Connection Type DHCP
Physical Address 08-10-73-0a-71-bb
DHCP Lease timer 0 Sec Lease timer 0
WAN IP Address 0.0.0.0
Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary DNS IP 0.0.0.0
Secondary DNS IP 0.0.0.0
lan status
Physical Address 08-10-73-0a-71-ba
LAN IP Address 192.168.1.1
Subnet Mask 255.255.255.0
DHCP Server ON
wireless status
Wireless Enabled
Connection Disconnected
MAC 08-10-73-0a-71-ba
Radio Band 802.11b/g
SSID default
Channel 6
Mode AP
Security None
system info
Edition Info APR-M14H-V1.1.14EN, 2006.07.03.16:30.
System Run Time 2 days 1 hours 30 minutes 41 seconds
Type Current NAT Transmit Accumulation Statistic Rate (KB/s)
Received Packets Received Bytes (K) Sent Packets Sent Bytes (K) Upload Download
TCP 0 0 0 0 0 0 0
UDP 0 0 0 0 0 0 0
ICMP 0 0 0 0 0 0 0
OTHER 0 0 0 0 0 0 0
TOTAL 0 0 0 0 0 0 0
i have run the wizard in the router and as far as i can see none of these have changed, both the primary and secondry DNS IP are showing all zero's before and after the wizard.
Mick
|