Be Forum Index Be Forum
FAQFAQ SearchSearch Back to Be Home PageBack to Be Home Page Who is OnlineWho is Online ProfileProfile
You have no new messagesYou have no new messages View Network StatusView Network Status
Byebye VIrgin, Hello Be!
Post new topic Reply to topic Be Forum Index -> Be Speed
View previous topic :: View next topic
Author Message
sibell
Little Be-ing
Posts: 7
PostPosted: Mon Jul 21, 2008 6:57 pm Post subject: Byebye VIrgin, Hello Be! Reply with quote
Got my line activated today! Spent about 30 mins sorting out the router which reported full connectivity but DNS wasn't resolving. I reset it and used the default DNS servers instead of the ones sent to me and things are working fine now!
Stats from the router plugged into the test socket:
Uptime: 0 days, 0:06:29
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,217 / 15,943
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 18.0
Line Attenuation (Up/Down) [dB]: 12.0 / 25.5
SN Margin (Up/Down) [dB]: 7.0 / 6.0
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 952
CRC Errors (Up/Down): 0 / 0
HEC Errors (Up/Down): 476 / 0
Should I be worried about the errors? I game alot so was thinking about enabling fastpath and moving to Annex M, but will I see much improvement with that Line Attenuation?
Back to top
fooby
Be-keeper
Posts: 303
Location: Burton-on-Trent
PostPosted: Mon Jul 21, 2008 7:38 pm Post subject: Reply with quote
line attenuation doesn't really change, as that's line loss. Meaning how far you are from the exchange.
Those errors are very low, but you have not been connected very long.
If you can post back to us when you have 8+ hours of uptime we can advise you further Smile
_________________
Be Usergroup Member
www.BeUsergroup.co.uk
Visit us @ irc.bethere.co.uk
Back to top
sibell
Little Be-ing
Posts: 7
PostPosted: Tue Jul 22, 2008 7:18 pm Post subject: Reply with quote
Hey guys, got an update:
Uptime: 0 days, 23:50:29
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,217 / 15,860
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 18.5
Line Attenuation (Up/Down) [dB]: 12.0 / 25.5
SN Margin (Up/Down) [dB]: 7.0 / 6.0
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 8 / 0
FEC Errors (Up/Down): 2 / 1,903,026
CRC Errors (Up/Down): 2 / 610
HEC Errors (Up/Down): 483 / 529
Should I bother with fastpath, or just go ahead and be thankful for what I've already got (which I am!) ?
Back to top
siteguru
Super Be-ing
Posts: 1651
Location: Strathaven
PostPosted: Tue Jul 22, 2008 7:20 pm Post subject: Reply with quote
Go for it. If it ends up being unstable then you can always go back to interleaved. Just raise a ticket and ask for a 6dB fastpath profile. Smile
_________________
Cheers!
Ian
Be* Unlimited
Website design
Photography
Divvys
Back to top
Visit poster's website
sibell
Little Be-ing
Posts: 7
PostPosted: Wed Jul 23, 2008 9:18 am Post subject: Reply with quote
Thanks siteguru, after fastpath enabled:
Uptime: 0 days, 1:12:50
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,217 / 16,763
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 18.5
Line Attenuation (Up/Down) [dB]: 12.0 / 25.5
SN Margin (Up/Down) [dB]: 7.0 / 6.0
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 12 / 0
Loss of Signal (Local/Remote): 1 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 9 / 0
FEC Errors (Up/Down): 0 / 0
CRC Errors (Up/Down): 0 / 617
HEC Errors (Up/Down): 0 / 546
Downloads max out at a consistent 1759KB/s! Smile
Back to top
siteguru
Super Be-ing
Posts: 1651
Location: Strathaven
PostPosted: Wed Jul 23, 2008 9:29 am Post subject: Reply with quote
Loss of Signal (Local/Remote): 1 / 0
Can you account for that? Keep an eye on the Loss Of stats - if they start creeping up then it would seem your line wouldn't suit fastpath.
Other than that, your speed is about right for your attenuation. (Can be better with a different router, like a Netgear DG834GT).
_________________
Cheers!
Ian
Be* Unlimited
Website design
Photography
Divvys
Back to top
Visit poster's website
sibell
Little Be-ing
Posts: 7
PostPosted: Wed Jul 23, 2008 8:10 pm Post subject: Reply with quote
Updated stats:
Uptime: 0 days, 12:03:25
DSL Type: G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]: 1,217 / 16,763
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 12.0 / 18.5
Line Attenuation (Up/Down) [dB]: 12.0 / 25.5
SN Margin (Up/Down) [dB]: 7.0 / 6.5
Vendor ID (Local/Remote): TMMB / BDCM
Loss of Framing (Local/Remote): 12 / 0
Loss of Signal (Local/Remote): 1 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 10 / 0
FEC Errors (Up/Down): 12 / 0
CRC Errors (Up/Down): 12 / 2,651
HEC Errors (Up/Down): 4 / 2,214
Is it possible the Loss of Signal occurred when I was moved to a fastpath connection? And should I worry about any loss of framing errors?
Back to top
ourpcman
Model Be-ing
Posts: 1394
PostPosted: Wed Jul 23, 2008 8:15 pm Post subject: Reply with quote
The "Loss Of" errors haven't changed in over 10 hours so I wouldn't worry.
Back to top
Display posts from previous:
Post new topic Reply to topic Be Forum Index -> Be Speed All times are GMT
Page 1 of 1
Watch this topic for replies
Jump to:
You can post new topics in this forum
You can reply to topics in this forum
You can edit your posts in this forum
You can delete your posts in this forum
You can vote in polls in this forum
Powered by phpBB © 2001, 2005 phpBB Group
OK thhis is only one example but Hey-Ho
Re public money. That doesn't matter to the Competition Commission. Bottom line Monopolies cannot exist!!!