Quote:
|
Originally Posted by wee willie
thanks very much guys
first, response to carlingman
results of
config
Type : Ambit ETH/USB Combo Cable ModemCable modem : Ambit Cable ModemMAC address : 00:d0:59:**:**:**IP address : 10.247.***.***Downstream Receive Power Level : 3.59 dBmvDownstream SNR : 23.35 dBUpstream Transmit Power Level : 33.00 dBmv
Operation Configuration
Network Access : EnabledMaximum Downstream Data Rate : 1536000 bpsMaximum Upstream Data Rate : 256000 bpsMaximum Number of CPEs : 1Software Upgrade File Name : C2403225.cprSoftware Upgrade AdminStatus : allowProvisioningUpgradeSoftware Upgrade OperStatus : completeFromProvisioning
Downstream Status
Downstream Lock : LockedDownstream Frequency : 402750000 HzDownstream Modulation : 64 QAMDownstream Receive Power Level : 3.84 dBmvDownstream SNR : 23.68 dBCable Modem StatusUpstream Status
is that enough info? |
Well I think you should give NTL another call as your Signal To Noise Ratio SNR is borderline at 23.68db coupled with the fact that your upstream power level shoud be closer to 40dbmv not 33.
PS I have * out your mac address and IP and asked a Passing Mod to remove it from your original post as it is not a good idea to post either on a public forum.