Thanks! Results are such.
Downstream Status
Operational
Channel ID 7
Downstream Frequency 339250000 Hz
Modulation QAM256
Bit Rate 20480000 bps
Power Level -3.24 dBmV
Signal to Noise Ratio 31 dB
Upstream Status
Operational
Channel ID 2
Upstream Frequency 29200000 Hz
Bit Rate 768000 bps
Power Level 53.00 dBmV
---------- Post added at 19:42 ---------- Previous post was at 18:38 ----------
Okay, been having issues again after half hour of solid use. I noticed the logs seemed a bit odd:
Quote:
Time Level Description
2008-03-06 16:56:40 error ToD request sent - No Response received
2008-03-06 16:54:44 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 16:54:44 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 16:54:02 error ToD request sent - No Response received
2008-03-06 16:54:01 information Ignore SW upgrade via provisioning: same image!
2008-03-06 16:54:00 notice TLV-11 - unrecognized OID
2008-03-06 16:54:00 notice Interface index:4 LinkUp
2008-03-06 16:54:00 notice Interface index:3 LinkUp
2008-03-06 16:53:59 notice Interface index:2 LinkUp
2008-03-06 16:53:59 notice SNMP COLD_START(SNMP Nmaccess mode)
2008-03-06 16:53:59 notice Cable Modem Status set to Registration Complete
2008-03-06 16:53:59 information Received REG-RSP from CMTS
2008-03-06 16:53:56 information Sending Registration Request
2008-03-06 16:53:56 notice TLV11#3 node not found
2008-03-06 16:53:56 notice TLV11#2 node not found
2008-03-06 16:53:56 information Processing Configuration File
2008-03-06 16:53:54 information DHCP: IP complete
2008-03-06 16:53:54 warning DHCP WARNING - Non-critical field invalid in response
2008-03-06 16:53:54 warning DHCP WARNING - Non-critical field invalid in response
2008-03-06 16:53:54 debug DHCP_coldstart() successfully
2008-03-06 16:53:52 information Beginning ranging process. Initial Power=53.00 dBmV
2008-03-06 16:53:52 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 16:53:48 information Sync recovery loop is locked
2008-03-06 16:53:44 information Scan Downstream Frequency...
2008-03-06 16:53:41 error BPI FLASH: The Mfg CA certificate not found!
2008-03-06 17:12:49 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out
2008-03-06 17:12:40 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:12:40 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:12:27 error ToD request sent - No Response received
2008-03-06 17:11:12 critical Started Unicast Maintenance Ranging - No Response received - T3 time-out
2008-03-06 17:10:52 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:10:52 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:10:41 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:10:41 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:09:49 error ToD request sent - No Response received
2008-03-06 17:09:23 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:09:23 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:09:05 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:09:05 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:09:04 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:09:04 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:08:57 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:08:57 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:07:32 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:07:32 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:07:11 error ToD request sent - No Response received
2008-03-06 17:06:35 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:06:35 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:06:06 information Got a map with the new UCD change count, and changed upstream parms
2008-03-06 17:06:06 information Got a map with the new UCD change count, and changed upstream parms
|
Is that normal? A few googles of the "T3 Timout" error seems to yield similar reports. The date also seems to be wrong.