[popper]

Originally Posted by SilverLady

Thanks for help. I've done speed test again and reading is coming up fairly steadily at download 5344 Kbps and Upload at 364 Kbps.

---------- Post added at 16:36 ---------- Previous post was at 16:33 ----------



Thanks Sigma. I've gone into link you gave and note below what it shows:

Signal
This page provides important information about the status and quality of the communications between your cable modem and the cable modem network.

Downstream Channel

The data shown in the table below provides information about the signal coming from the network to your cable modem.

Downstream Status

Operational

Channel ID

0

Downstream Frequency

331000000 Hz

Modulation

QAM256

Bit Rate

10240000 bps

Power Level

1.44 dBmV

Signal to Noise Ratio

37 dB

Upstream Channel

The data shown in the table below provides information about the signal being transmitted to the network from your cable modem.

Upstream Status

Operational

Channel ID

3

Upstream Frequency

25800000 Hz

Bit Rate

384000 bps

Power Level

41.00 dBmV

Can you tell me what this shows?

---------- Post added at 17:23 ---------- Previous post was at 16:36 ----------

.


Sorry to take up more space on this topic, but this is what I get when checking with SpeedTest. Not sure that Dublin is the closest server to Fife, but SpeedTest says it is.

hmmm, thats odd, your download Bit Rate at 10240000 bps is right, as thats 10Mbit/s.

but your Upload Bit Rate at 384000 bps seems wrong as thats nearer the old speed not the new 512Kbit/s upload rate it should be, is every ones upload rate outside the xC&W/xNTL areas that same lower speed setting?