Cable Forum - View Single Post

Lord Nikon · 24-11-2007, 14:18

Ok

Go to your router's webpage (check the manual) and log in, go to wireless, then security, enable WPA or WPA2 - PSK and enter a password, accept, the router will reboot, and your computer will no longer connect, you will need to enter the same password on the PC to connect. This will help.

I would also suggest using MAC address filtering, but that could get a little more technical to do, whereas this will be a quick fix.

Be ready to use an ethernet cable to get back online if you run into issues so we can talk you through them.

24-11-2007, 14:18	#2
Lord Nikon Inactive Join Date: Jun 2003 Location: NW UK Posts: 3,546	Re: Belkin G+ mimo problem Ok Go to your router's webpage (check the manual) and log in, go to wireless, then security, enable WPA or WPA2 - PSK and enter a password, accept, the router will reboot, and your computer will no longer connect, you will need to enter the same password on the PC to connect. This will help. I would also suggest using MAC address filtering, but that could get a little more technical to do, whereas this will be a quick fix. Be ready to use an ethernet cable to get back online if you run into issues so we can talk you through them.