|
Re: PC building - PSU Question
the psu should either be a 20 pin atx with a 4 pin atx 2 adapter that fits on the end of the 20 pin and a seperate 4 pin 12 v or just the 20 pin and a 12 volt 4pin. If it only has 1 4 pin 12v then the psu is standard atx 1 and you will need a 20 pin to 24 pin adapter if your board needs 24 pin. Also note some boards with 24 pin atx 2 connection will run with 20 pin atx 1 but you will have to rtfm
|