Cable Forum - View Single Post

spiderplant · 10-03-2007, 21:36

Hold in the Stop and Play/Pause buttons on the front panel, and press Reset. Keep Stop and Play/Pause held in until the display says 'boot'.
After a few seconds the display should say 'outpt'. Press the Fast Forward button several times until the display says 'Hdrni', then press OK. Wait for the box to reboot and it'll be in HDMI mode.

It's normal for the disc to remain spinning when in standby. It might spin down occasionally, but it's not easy to predict when. Your best bet it to try to stand the box on something that absorbs the noise (but don't block the air vents).

By the way, the 'online' light means the cable modem is connected. It's nothing to do with the disc.

10-03-2007, 21:36	#2
spiderplant cf.mega poster Join Date: Jun 2003 Posts: 9,018	Re: New installation V+ dilema! Hold in the Stop and Play/Pause buttons on the front panel, and press Reset. Keep Stop and Play/Pause held in until the display says 'boot'. After a few seconds the display should say 'outpt'. Press the Fast Forward button several times until the display says 'Hdrni', then press OK. Wait for the box to reboot and it'll be in HDMI mode. It's normal for the disc to remain spinning when in standby. It might spin down occasionally, but it's not easy to predict when. Your best bet it to try to stand the box on something that absorbs the noise (but don't block the air vents). By the way, the 'online' light means the cable modem is connected. It's nothing to do with the disc.