Cable Forum - View Single Post

RUSTY · 02-03-2007, 17:35

had a `new` v+ box silver for two days, to cure the not to noisy hum from hard drive. cut a piece of rubber to `just `lift the right hand two base feet off the tv/cabinet shelf, place the rubber half way between the feet and about half inch in from the v + box side.rubber I used was ex conveyor belt, assume an eraser rubber or two would do the same from w h smith or..... took 90% of the hum away.hope this helps.

02-03-2007, 17:35	#29
RUSTY Inactive Join Date: Oct 2006 Location: Long Eaton Age: 88 Services: ntl 10Mg broadband, ntl XL samsung TV drive V+ talk unlimited RF Mod powered scart Tivo HTC Desir Posts: 222	Re: Is it supposed to be as noisy? had a `new` v+ box silver for two days, to cure the not to noisy hum from hard drive. cut a piece of rubber to `just `lift the right hand two base feet off the tv/cabinet shelf, place the rubber half way between the feet and about half inch in from the v + box side.rubber I used was ex conveyor belt, assume an eraser rubber or two would do the same from w h smith or..... took 90% of the hum away.hope this helps.