Quote:
Originally Posted by zinglebarb
so your os is on a sata? if this is the case your optical will be on primary ide on the mobo but the bios may not see it as ide 1 if sata are set for ide sometimes sata set to ide take priority.Do you now have 2 operating systems? does it try to dual boot? Sata drives are always master so it does not matter which one has the os on ive had os's spread all over machines when ive multi booted. As for why its lagging is c: still holding os or is it the old os?
Do you use hdcp off your gfx? if not and its not causing any problems then I wouldnt worry about
I would personally back up all data to whatever drive your gonna want to use as slave and volume label it spare then id open the case and ensure the drive you wish to use as operating system is on sata 0 or sata 1 whichever is the lowest . Then id perform a reinstall of windows to this drive. You wont make a mistake as you set the volume label of the slave so this will show up in set up  |
yes the os is on a sata and it looks like its on raid1 as its on the master drive, to get it to boot into the other (corrupt) operating system i have to get it to boot from the salve sata which looks like its on sata 3
when it boots it says the optical drive are on the primary ide and the hard drives are in the third ide which confuses me
regarding the lag, c is always holding the active os as the c drive changes depending on which you boot from.
i dont know what hdcp is yet
, just trying to get this thing running clean so i can ghost it
---------- Post added at 21:53 ---------- Previous post was at 21:52 ----------
Quote:
Originally Posted by kfridge
your last issue could be a driver issue...try updating the drivers for your graphics card to the latest ones. Download the latest catalyst drivers from here link |
already on the latest
---------- Post added at 21:55 ---------- Previous post was at 21:53 ----------
Quote:
Originally Posted by zinglebarb
|
hmmmm
