Cable Forum - View Single Post

MovedGoalPosts · 09-12-2006, 17:38

Switch the STB off at the power. Carefully remove and replace the cable connection, ensuring this is fully screwed home, and the wires in the cable end are straight (especially the little centre one) so it gets fully seated into the STB sockets. Remove the card, wipe on clean dry cloth, replace. Haveing been off for say 10 minutes, power up.

If it still don't work faults should be open tommorrow, late morning. Call them.

In moving stuff around, you didn't change the actual cable length / fitting did you?

09-12-2006, 17:38	#2
MovedGoalPosts Inactive Join Date: Jun 2003 Location: 127.0.0.1 Age: 62 Posts: 15,868	Re: Lost ntl TV signal Switch the STB off at the power. Carefully remove and replace the cable connection, ensuring this is fully screwed home, and the wires in the cable end are straight (especially the little centre one) so it gets fully seated into the STB sockets. Remove the card, wipe on clean dry cloth, replace. Haveing been off for say 10 minutes, power up. If it still don't work faults should be open tommorrow, late morning. Call them. In moving stuff around, you didn't change the actual cable length / fitting did you?