View Single Post
Old 27-10-2004, 23:38   #27
Bifta
Inactive
 
Join Date: Jul 2003
Location: Eglinton, Co. Derry
Posts: 7,640
Bifta has a nice shiny starBifta has a nice shiny star
Bifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny starBifta has a nice shiny star
Re: Far Cry 1.3 Patch Released...

Quote:
Originally Posted by theblueraja
Yeah,
Your right, but IIRC i think there is a bit of a funny one with Dolby Digital and Audigys - something to do with it supporting Dolby Digital decoding but not encoding or vice versa.

I will try and find out but im off to bed now so probably tomorrow. Its not very well explained (if at all) but they hint about it in this thread over here - http://www.ntcompatible.com/thread25243-1.html - i just need to remember where i saw the page that explained it.
It doesn't need to encode anything, the game already has the 5.1 sound encoded, so all the Audigy has to do is decode it to a suitable set of 5.1 speakers. I've also used an Audigy 1, 2 and ZS to output DD 5.1 (AC3) to digital speakers with no problems.

Edit: you're right, just read this on the Crytek forums

Quote:
You are trying to route an EAX signal through the coaxial. This will not work. the soudn will simple be sent out as 2 channel 48 KHz signal downsampled.

For EAX, you need to use the component outputs at the back of your card.

You will not get Dolby-Digital in an Creative labs card for games since in games you need the Dolby Digital Integrated Content Encoder.

DVD movies play fine through your coaxial because DVD movies D-D tracks are pased as is to your Dolby-Digital EXTERNAL decoder.

FarCry may(not sure) use Direct Sound to decode dolby Digital and route it through Creative labs 5.1 outputs, and you can test it to see if you get all the channels by standing infront of the ingame radio in a hut and turning 360 degrees. If the sound passes through all the speakers, you have 5.1 Dolby-digital. If not, switch to EAX 2.0, this will work fine.

Remember:
Coax + game in Dolby Digital = Soundstorm chipset only.
anything else = component output using either software decoder (propritary or DirectX) or EAX.
Bifta is offline   Reply With Quote