Cable Forum - View Single Post

29-07-2003, 12:51

If you have download speeds in the 60's, I would check a few things first, before phoning ntl.

If you have an Ambit modem (ntl:home 100/120), you can check which service your modem is configured for, by going here:-

http://192.168.100.1
(password & username = root)

Clicking on 'Operation Configuration' will show you which service you are on, under 'Maximum downstream Data Rate'.

Then I would check that windows is set up properly for your BB speed by going here:-

http://www.dslreports.com/tweaks

and running Tweak Tester II to see if your RWIN is set correctly. If not, download DrTCP from the same site & set RWIN to a value it recommends.

29-07-2003, 12:51	#14
XFS03 Guest Location: East London (ex-C&W) Services: XL broadband ntl250 modem Posts: n/a	If you have download speeds in the 60's, I would check a few things first, before phoning ntl. If you have an Ambit modem (ntl:home 100/120), you can check which service your modem is configured for, by going here:- http://192.168.100.1 (password & username = root) Clicking on 'Operation Configuration' will show you which service you are on, under 'Maximum downstream Data Rate'. Then I would check that windows is set up properly for your BB speed by going here:- http://www.dslreports.com/tweaks and running Tweak Tester II to see if your RWIN is set correctly. If not, download DrTCP from the same site & set RWIN to a value it recommends.