View Single Post
Old 04-08-2004, 13:26   #5
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
Re: ELSA Lancom L-11 Wireless Access Point

Thanks for hearing me, Neil...

I've got the standard NTL Ambit USB / Ethernet Cable Modem, which was previously connected to my WinXP Pro laptop via USB. This was the machine that I used to register with NTL way back in the mists of time, and everything has been peachy.

The Wireless Access Point has an Ethernet connection (to be expected), which, with aforementioned Firmware upgrade, *allegedly* connects to Ethernet-enabled Cable Modems.

The manual for the WAP rants on about supplying a service name / numbers, username, password etc. - but my understanding is that you don't need to *log in* to NTL per se. I've also read articles (on lesser sites ;-)) claiming that you need to 'spoof' the MAC address of the computer that originally registered with NTL, although I don't believe that this is possible with the ELSA device.

I can communicate with the ELSA over wireless, and get into configuration mode, and it seems to acknowledge that it is connected to something via the Ethernet port - it even appears to have two IP addresses, 10.0.0.1 and another starting with 169 (I'd love to tell you what it is exactly, but I'm at work and it's at home). However, I can get no further! Interesting to note that on the ELSA device, the 'LAN Collision' light is permanently on.

First thought - maybe it needs a crossover, rather than a *normal* cable? However, I would expect this to be documented in the manual (how dangerous assumptions are!). Other than that - clueless! I'm only a programmer... ;-)
stigthew is offline   Reply With Quote