Quote:
|
Originally Posted by stigthew
Hi everyone,
I've been connected to NTL 600k for two years or so now, in general it's been pretty good.
|
That's nice.
Quote:
|
Originally Posted by stigthew
About 6 months ago, I bought a new laptop with Wireless on board, and thought I'd get a Wireless PCMCIA for my old laptop (which originally setup NTL). Since then I have been using ICS to provide a wireless broadband connection in the house.
|
So far so good then....
Quote:
|
Originally Posted by stigthew
However, I now want to move my old laptop out of the room where the Cable Modem is, so I got hold of a Wireless Access point (ELSA Lancom L-11). With a firmware upgrade (supplied on CD), this supposedly allows it's wired Ethernet port to connect directly to a DSL Cable Modem. However, so far, I have had no luck whatsoever 
|
You don't have a '
DSL cable modem'....
What have you actually done/tried?
Quote:
|
Originally Posted by stigthew
Has anybody out there had any experience with the ELSA L-11? To be perfectly honest, I haven't got a clue where to start - and the manual with the Access Point is about as useful as a choco teapot...
|
I have no experience with that hardware, but tell us a bit more about how
everything is connected/set up-the more info the better.
Quote:
|
Originally Posted by stigthew
Any help / suggestions would be gratefully accepted!
|
The ball is rolling!
[Edit/Update]-The ELSA Lancom L-11 appears to be an access point with an
integrated DSL router, & I think that is your problem.
What you (ideally) need is a standard wireless router-such as one of these:
http://www.broadbandbuyer.co.uk/Shop...pID=38&Alt=Yes
That will connect to your modem, & will then pass the BB connection to your wireless laptop(s)
If you then need a wireless access point (WAP), then you need one of these:
http://www.broadbandbuyer.co.uk/Shop...upID=8&Alt=Yes
HTH