Cable Forum - View Single Post - a ongoing problem that just escalated need ntl attention

Chrysalis · 23-07-2004, 20:23

UBR 10.146.103.254 at 2004 Jul 23, 19:16

Channel Freq Max Usage Users Min Ave Max
MHz kbps kbps ms ms ms
Dnstr 0 402.75 30342 10192 537 30 120 521
Upstr 1 18.0 2560 916 107 71 192 521
Upstr 2 20.0 2560 527 85 30 110 361
Upstr 3 22.0 2560 358 69 30 90 300
Upstr 4 24.4 2560 111 73 30 81 260
Upstr 5 26.4 2560 618 84 40 137 461
Upstr 6 28.4 2560 314 119 30 94 290

Ambit EuroDOCSIS Cable Modem 60549EU HW_Rev:1.9, SW_Rev:2.40.3225

System up time = 2 days 02h 32m 58.00s
Ethernet carrier sense xmit errs.1 = 259
Downstream channel ID = 0
Downstream channel frequency = 402750000 Hz
Downstream received signal power = -14.8 dBmV
Upstream channel ID = 1
Upstream channel frequency = 18000000 Hz
QoS max upstream bandwidth = 128000 bps
QoS max downstream bandwidth = 600000 bps
SigQu: Signal to Noise Ratio = 30.9 dB
Cable modem status = Operational
Upstream transmit signal power = 52.2 dBmV
Date and Time = 2004-07-23,18:49:16.0
Configuration filename = ntlhm120-silver.cm

I noticed I am on channel 1 which has a min ms of 72 double of all the other channels, I suspect there is an issue, can justanothernoob or another tech look into this? if not if I ring up reporting I used docsdiag to find a problem are they ok with it? also is my ubr scheduled to have the 5120 upstream upgrade?

23-07-2004, 20:23	#14
Chrysalis cf.mega poster Join Date: Sep 2003 Posts: 12,047	Re: a ongoing problem that just escalated need ntl attention UBR 10.146.103.254 at 2004 Jul 23, 19:16 Channel Freq Max Usage Users Min Ave Max MHz kbps kbps ms ms ms Dnstr 0 402.75 30342 10192 537 30 120 521 Upstr 1 18.0 2560 916 107 71 192 521 Upstr 2 20.0 2560 527 85 30 110 361 Upstr 3 22.0 2560 358 69 30 90 300 Upstr 4 24.4 2560 111 73 30 81 260 Upstr 5 26.4 2560 618 84 40 137 461 Upstr 6 28.4 2560 314 119 30 94 290 Ambit EuroDOCSIS Cable Modem 60549EU HW_Rev:1.9, SW_Rev:2.40.3225 System up time = 2 days 02h 32m 58.00s Ethernet carrier sense xmit errs.1 = 259 Downstream channel ID = 0 Downstream channel frequency = 402750000 Hz Downstream received signal power = -14.8 dBmV Upstream channel ID = 1 Upstream channel frequency = 18000000 Hz QoS max upstream bandwidth = 128000 bps QoS max downstream bandwidth = 600000 bps SigQu: Signal to Noise Ratio = 30.9 dB Cable modem status = Operational Upstream transmit signal power = 52.2 dBmV Date and Time = 2004-07-23,18:49:16.0 Configuration filename = ntlhm120-silver.cm I noticed I am on channel 1 which has a min ms of 72 double of all the other channels, I suspect there is an issue, can justanothernoob or another tech look into this? if not if I ring up reporting I used docsdiag to find a problem are they ok with it? also is my ubr scheduled to have the 5120 upstream upgrade?