Cable Forum - View Single Post - Another customer service cock-up!

Lord Nikon · 11-07-2003, 20:09

STB Engineering status display...

Pace DiTV 1000 & 2000 - initiate a front panel reset by pressing OK, LEFT ARROW and TV on the front panel, then hold down the UP & DOWN arrows on the front panel (not channel up & down)

alternatively pull the plug & power back up with the UP & DOWN keys held down (in all cases this means ON THE BOX)

Pace DiTV 4000 series, Press Left, Right and Services on the front of the box, this is the FP reset, then hold down the UP & DOWN keys as on the 1000 / 2000 series.

Or cycle the power and hold down the UP & DOWN keys ON THE BOX.

a smaller status window can be accessed using PG UP, PG DOWN, BLUE on the remote.

11-07-2003, 20:09	#2
Lord Nikon Inactive Join Date: Jun 2003 Location: NW UK Posts: 3,546	STB Engineering status display... Pace DiTV 1000 & 2000 - initiate a front panel reset by pressing OK, LEFT ARROW and TV on the front panel, then hold down the UP & DOWN arrows on the front panel (not channel up & down) alternatively pull the plug & power back up with the UP & DOWN keys held down (in all cases this means ON THE BOX) Pace DiTV 4000 series, Press Left, Right and Services on the front of the box, this is the FP reset, then hold down the UP & DOWN keys as on the 1000 / 2000 series. Or cycle the power and hold down the UP & DOWN keys ON THE BOX. a smaller status window can be accessed using PG UP, PG DOWN, BLUE on the remote.