Cable Forum - View Single Post - D-Link Printer server help

hackedoff · 09-04-2004, 13:01

maybe im missing something here...
cant get to the server through I.E, but on my router info is as follows:

LAN DHCP Settings
With the Belkin Gateway Router, you can specify an internal IP address. You may also turn the DHCP service on and off. We recommend using DHCP service for the easiest setup of your network. Making changes to this screen will require you to re-configure your networked PC's.
IP address :. . . IP Subnet Mask :255.255.255.0 DHCP Service : Enabled Disabled Lease Time (sec) : Half hourOne hourTwo hourHalf dayOne dayTwo dayOne weekTwo weekForever IP address pool

Start IP : . . . End IP :. . . Domain Name :

09-04-2004, 13:01	#10
hackedoff Inactive Join Date: Feb 2004 Posts: 23	Re: D-Link Printer server help maybe im missing something here... cant get to the server through I.E, but on my router info is as follows: LAN DHCP Settings With the Belkin Gateway Router, you can specify an internal IP address. You may also turn the DHCP service on and off. We recommend using DHCP service for the easiest setup of your network. Making changes to this screen will require you to re-configure your networked PC's. IP address :. . . IP Subnet Mask :255.255.255.0 DHCP Service : Enabled Disabled Lease Time (sec) : Half hourOne hourTwo hourHalf dayOne dayTwo dayOne weekTwo weekForever IP address pool Start IP : . . . End IP :. . . Domain Name :