Quote:
|
Originally Posted by clueless
Can any 1 set up a ftp server with ntl i have tried with serv-u and bulletproof but to no evail
|
Tun run an FTP server behind a NAT router you need to:
Configure the FTP server to:
1. Use the IP address of the WAN port of your router instead of its own LAN address when writing IP addresses to the FTP command stream;
2. Use a predefined limited range of ports for FTP passive mode connections, e.g. 50000-50099.
Configure the NAT router to:
3. Forward port 21 to the FTP Server LAN address;
4. Forward the range of passive ports (as configured in the server) to the FTP server LAN address.
I do not know the details of configuring the Belkin router, but details for configuring the server applications and the Linksys range of routers are given at
http://www.linksysftp.org/. Good luck!