Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Science & Technology (https://www.cableforum.uk/board/forumdisplay.php?f=26)
-   -   wireless interference (https://www.cableforum.uk/board/showthread.php?t=6177)

Cyrill666 09-01-2004 16:24

wireless interference
 
Hello,

I'm lead to believe that microwave ovens and DECT phones can cause problems with wireless networking in the home. Has anyone experienced this and if so, how did the problems manifest themselves?

I ask because I was using my wireless connection from another room whilst talking on a DECT phone, and I noticed no degradation of networking performance.

I'm on 802.11b (11 Mbps)

Just wondering.

Kind regards,
Cyrill666
:D

Stuartbe 09-01-2004 16:31

Re: wireless interference
 
Quote:

Originally Posted by Cyrill666
Hello,

I'm lead to believe that microwave ovens and DECT phones can cause problems with wireless networking in the home. Has anyone experienced this and if so, how did the problems manifest themselves?

I ask because I was using my wireless connection from another room whilst talking on a DECT phone, and I noticed no degradation of networking performance.

I'm on 802.11b (11 Mbps)

Just wondering.

Kind regards,
Cyrill666
:D

It only realy efects 54g or 802.11g to be acurate. The newer technology operates at 2.4ghz - very near the bands that dect phones use.

I have a belkin wap and two wireless clients - my dect phone only efects them if I stand very close to the wap.

HTH

SMHarman 09-01-2004 16:33

Re: wireless interference
 
The problems are likely to be dropped connections / weak connections. They are due to all three operating on similar frequencies. Dect is 1900Mhz, Networks at 2400Mhz. Orange, Virgin and T Mobile might also join the party at 1800Mhz.

No Idea what frequency you microwave food at though, probably a wide band of radiation. Microwaves cause problems if the seals on the door have failed.

Shaun 09-01-2004 17:08

Re: wireless interference
 
Microwaves use a frequency of 2.8Ghz, that's 2800Mhz, so I guess they could interfere, but only if the shielding on the magnetron or the door seals have gone!


All times are GMT. The time now is 01:53.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum