Sweex router and Telewest Broadband - please help!
 

I recently purchased the sewwx wireless router and hooked it up to my modem with a utp cable in the wan socket. my wireless enabled laptop has piceked up the signal and i can get to the sweex page http://192.168.123.254 but i must not have used the setup properley as i still cant get on the net using the laptop. I get the message, PAGE CANNOT BE DISPLAYED, please help.

---------- Post added at 11:11 ---------- Previous post was at 11:11 ----------

* sorry, i mistyped - SWEEX WIRELESS BROADBAN ROUTER

Re: SWWEX ROUTER AND TELEWEST BROADBAND, PLEASE HELP!!!
 

Did you power down the modem before connecting?

If not, power everything off & turn on in the following order:

Modem, router, PC. Allow the modem to stabilise before turning on the router, likewise with the router before turning on the PC...

Re: SWWEX ROUTER AND TELEWEST BROADBAND, PLEASE HELP!!!
 

http://www.cableforum.co.uk/board/sh...325#post518325
Might want to search thr forum for Sweex as it has caused no end of trouble for members

Re: Sweex router and Telewest Broadband - please help!
 

Thread title altered - and capped down. No need to shout. ;)

Re: Sweex router and Telewest Broadband - please help!
 

I did all that, and my laptop recognises the network, and its signal strength is excellent, but i still cant get on the net. it keeps saying page not be dispalyed

Re: Sweex router and Telewest Broadband - please help!
 

have you done the setup wizard?
if not - do it.

select manual configuration

and then dynamic isp

then goto the first options menu (basic)
goto wireless - then WDS settings
then enable wireless bridging.

then save that and reboot the router.

then goto primary setup (again in basic), and goto the MAC address option.
clone your computers address onto the router by clicking the available tab.

then save and reboot.

then go back to the main page (status) and click on the renew tab.
then a release IP address tab should come up, click that, and hopefully thats you done!

ed