Cable modem signal levels
 

This doesn't work for me - I get a 'this page cannot be displayed' error. Anyone know why this might be happening?

Mike

Re: Cable modem signal levels
 

Some modems need to be rebooted before you can access them, try power cycling the modem, also check you are not specifying a proxy in your Internet Explorer / Browser settings.
What SACM is it you have?

Re: Cable modem signal levels
 

Try.....

http://192.168.100.1/

Then login as root,root.

Re: Cable modem signal levels
 

Thanks for the suggestions.

Rebooting the modem makes no difference
Using the link http://192.168.100.1/ also makes no difference - I still get 'this page cannot be displayed' instead of a login prompt.
No proxy specified.
The modem is a Terayon TJ210

Mike

Re: Cable modem signal levels
 

Do you have any firewall or router in the setup?

Re: Cable modem signal levels
 

I'm not sure if the Terayon TJ210 is able to access that web address. If i'm wrong someone please correct me.

[Edit]

You can't access that modem through that web address, i've just googled it.

Source

Re: Cable modem signal levels
 

Ah, thanks. That would explain it :)

Might be worth one of the moderators updating the sticky thread with a list of modems that are/aren't supported.

Mike

Re: Cable modem signal levels
 

I used to be able to use "docsdiag" on my TJ210 but can now only do this when the modem is offline (ie NTL CATV down), so cannot see signal levels or configured rates any more (at least with 4 or 10Mbps service)