Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Error code 10 ??? (https://www.cableforum.uk/board/showthread.php?t=43557)

bopdude 24-02-2006 18:46

Error code 10 ???
 
1 Attachment(s)
Hi all, trying to install a pci ethernet card, had a dog of a job just to get xp to see it, now it does and now I have the driver installed I get this error ( see piccie )

Any ideas ?? Looking around the WWW most of the probs of this nature are to do with USB devices, TIA

PS, it's to set up a wired network between to XP machines, but I thought it more hardware related atm.

marky 24-02-2006 18:58

Re: Error code 10 ???
 
To me its either broken or in conflict with somthing :shrug:

dilli-theclaw 24-02-2006 19:00

Re: Error code 10 ???
 
Have you tried it in a different pci slot?

bopdude 24-02-2006 19:03

Re: Error code 10 ???
 
Quote:

Originally Posted by marky
To me its either broken or in conflict with somthing :shrug:

Quote:

Originally Posted by dilligaf1701
Have you tried it in a different pci slot?

Thanks guys, I'll try tomorrow, had enough pulling pc's to bits today, tonight it's FNG, for those in the know ;)

marky 24-02-2006 19:15

Re: Error code 10 ???
 
I hate it when somthing goes wrong, the list can be endless :(

Paul K 24-02-2006 19:16

Re: Error code 10 ???
 
Have you checked out what the error means?
http://support.microsoft.com/kb/q125174/

bopdude 24-02-2006 19:27

Re: Error code 10 ???
 
Quote:

Originally Posted by Paul
Have you checked out what the error means?
http://support.microsoft.com/kb/q125174/

Thanks mate, didn't know that list was about, still double dutch to me, I think I have the right drivers installed but am just about out of time for tonight, it's Friday. Night. Games. FNG sad I know :dozey: :p: :D

I'll give it another coat of looking at tomorrow :tu:

Paul K 24-02-2006 21:00

Re: Error code 10 ???
 
Do you know that the card works? I would try it in another system to see if it throws the same hissy fit.

KingPhoenix 24-02-2006 21:36

Re: Error code 10 ???
 
Bop....

1) Wrong drivers
2) Knackered card

goldchip 26-02-2006 10:48

Re: Error code 10 ???
 
MS says quite clearly on that page: "Solution button: Update Driver"

Paul K 26-02-2006 11:06

Re: Error code 10 ???
 
Quote:

Originally Posted by goldchip
MS says quite clearly on that page: "Solution button: Update Driver"

Trouble is that the card could be faulty and being mis-identified by windows which would then load the wrong drivers. In that case re-loading drivers will not help as the card would still be faulty.

goldchip 26-02-2006 11:47

Re: Error code 10 ???
 
Which is the first troubleshooting step? - the easiest, drivers, then replace nic.

Paul K 26-02-2006 12:03

Re: Error code 10 ???
 
Quote:

Originally Posted by goldchip
Which is the first troubleshooting step? - the easiest, drivers, then replace nic.

Which he has been told to do. My post highlighted the drivers issue as per the MS knowledgebase article and he has been told to test the card in another PC by myself and others ;)

bopdude 26-02-2006 19:01

Re: Error code 10 ???
 
ok guys, update, sorry i didn't do this earlier before i went to work. Problem solved, it was a conflict, swapping pci slots sorted it out, thanks for all the help and suggestions, greenies on the way when i get to my pc,...... it'll take to long on the xda.

Thanks again.

LSainsbury 27-02-2006 18:47

Re: Error code 10 ???
 
For the record: EventID is excellent for looking up error codes!


All times are GMT. The time now is 03:32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum