![]() |
End of my teather with this one.
If anyone can help on this problem i would be most grateful, my sis in law had NTL tv installed yesterday engineer called to install the box, ripped out and i do mean ripped out the satellite box. Installed a pace box and told here that it would take 2 hours for the channels to appear. 12 hours later and a call to CS to be told it takes 24 hours, fair enough waits till today rang them back and this time its 36 hours for it to be available. After ringing again was told it was down to a local area fault, despite this being cleared then after ringing again an enginer was booked for which is going to take 2 weeks now 2 weeks to go without TV after being installed for less than 24 hours is a bit of a **** take, especially after the engineeer did a wonderful demolition job on the sky box so that isnt going back in. leaves her without TV and NTL point blank refusing to admit that it isnt working they reluctantly booked an engineer after many complaints. This really is diabolical.
|
Re: End of my teather with this one.
Try ringing CS again, and simply just ask for a refresh signal to be sent to the box. There's a high chance that your channels will then appear.
|
Re: End of my teather with this one.
Have you powered off the STB, left off for a few minutes then powered on again? Sometimes that can prompt it to load the signals you need.
However it does seem that you are getting the runaround, and a fortnight wait for an engineer on a faulty install is appalling. If you want to PM me some details (account name, address, account number, contact phone - for ntl) I'll forward it to our ntl contacts to escalate. However the holiday period may mean it doesn't get looked at by them for a few days. |
Re: End of my teather with this one.
Quote:
---------- Post added at 18:51 ---------- Previous post was at 18:39 ---------- Thanks for the help PM Sent, and yup i have powered it off and rebooted it looks like i am going to have to go sort the satellite box out so at least she has some TV to watch. |
Re: End of my teather with this one.
Quote:
|
Re: End of my teather with this one.
Quote:
One thing to check is the box number, it may be possible that the wrong serial number has been attached so the hits aren't clearing |
Re: End of my teather with this one.
:doh: my brain hurts!
|
Re: End of my teather with this one.
An engineer is due to visit me on tuesday because i rang Tech support for my BB this morning which later turned out to be A local fault which NTL sorted later in the day. My sis in law was told an engineer isnt available for 2 weeks so i have to have an engineer when i dont need one and she cant have one when she does. Sorry for any confusion on this one we do live around the corner from each other.
---------- Post added at 19:01 ---------- Previous post was at 19:00 ---------- Quote:
|
Re: End of my teather with this one.
Quote:
If i was her I would also complain about the way the Sky Box was treated- If it was me and there was any damage to the box I would be seeking compensation from ntl to pay for it. |
Re: End of my teather with this one.
I was always told that engineers are NOT ALLOWED to touch any existing cabling,be it satalite or aerial (a lot of punters who,when upgraded to digital & told they needed a outside aerial tried it on,saying NTL removed the aerial.My argument there is why would a already busy tech waste time to remove a customers aerial ,especially as they aint paid to do that!)
Even when I replaced a existing cable,I always ask the customer to remove it themselves as that way I'm not responsible to any damage to the skirting board,ect. Spike |
Re: End of my teather with this one.
Quote:
Doofy: did they only send one set of hits to your box? For some reason whenever a hit is sent to my box (normally promoting my service after demoting it), it always seems to take 3 attempts. 2 if I am extremely lucky. They just seem to disappear into the ether when sent to me. |
Re: End of my teather with this one.
Quote:
|
Re: End of my teather with this one.
Quote:
|
Re: End of my teather with this one.
Quote:
|
| All times are GMT. The time now is 17:10. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum