ntl:100 modem help
 

i need to reset my modem to install a router as it wont share the connection between my pcs the cards find the router but doesnt share the internet. cant find how to reset the modem any help is appreciated thanx

Re: ntl:100 modem help
 

:welcome: to Cable Forum :D

Simplest way is to unplug the power at the wall, leave off for 30 seconds or so, plug back in let all the lights settle down, and then power on the router instead of the PC. Only the rotuer, not the PC must now be connected to the modem

Re: ntl:100 modem help
 

ive had the router for a while couldnt get it to work though but ive got a psp and need a router to run the wifi on it.could not reseting the modem be the problem for my router not sharing the internet connection all this time? lol

Re: ntl:100 modem help
 

The modem can only "see" one device connected to it at a time. Unless the modem is reset, it will normally remember the last device connected to it that it used to speak to and won't become aware of anything else.

Resetting clears that memory, and tells the modem to look for something new to speak to.

Remember that only one thing should be directly connected to the modem, so if you were using USB to connect the PC, disconnect the USB leads connecting to the modem, before you connect the router via ethernet.

Re: ntl:100 modem help
 

did everything right and my network card wouldnt connect to the router the 1 on my laptop connected assigned an ip but didnt have a connection still no idea what to do now lol thanx for the help

Re: ntl:100 modem help
 

What is the make / model of the router. Many have a reset button - worth trying that to ensure you are on manufacturer settings.

Unplug and disconnect everything.

Now connect the router ethernet to the modem
connect the router to PC#1
connect the router to laptop

power on the modem, give that 5 minutes to settle
power on the router, give that a couple of minutes
power on PC#1 & laptop

Both PC and laptop should automatically get an IP from the router. If not check the network connections settings on your PC or laptop to see that TCP/IP connection is set to automatic.

Re: ntl:100 modem help
 

it doesnt say the make on the box any where it says WL-R4 wireless broadband router with 4 100/10Mbps N-way switch. ive searched google and cant find anything on it its a few years old

Re: ntl:100 modem help
 

Anything like this one http://amer.com/catalogue/ewlr4.html ?

Re: ntl:100 modem help
 

same shape. leds on front look kind of the same but apart from that its all grey

Re: ntl:100 modem help
 

Hmm, I see no reason why it shouldn't be working. Have you verified that the cables are OK?

Re: ntl:100 modem help
 

cables are working fine checked the connection with my laptopt and pc

Re: ntl:100 modem help
 

these are most of the settings in my router setup notice anything out of place i only have 2 ethernet cables to connect the modem to the router and the pc to the router.
LAN setup
IP 192.168.1.1
Subnet Mask 255.255.255.0

WAN
Basic Setup
x Clone Mac Address
Mac address xx:xx:xx:xx:xx:xx
Gateway Name : Home
Domain Name : Home
Wan Setup
Static : x Dynamic : PPPoE
DNS Setup
x Auto

WLAN
operating Mode : Access Point
SSID : Wireless
Channel : 8
Transmission Rate : 11Mbps
RTS Threshold : 2347
FRag Threshold : 2346
Preamble Type : : Long Preamble
ESSID To Use
Encryption Level : No Encryption(leaving off untill working)

DHCP
Disable
x Enable DHCP Server
Start IP : 192.168.1.10
Pool Size : 60
DHCP Relay Server
Server IP : 192.168.0.199

Operation
Router Mode : x NAT : Normal
Firewall : x Enable
it still isnt sharing the connection when i do what u told me to do :(

Re: ntl:100 modem help
 

i got it going :D i reset it again disconnected the modem for 5 mins connected everything to the pc and router and modem with the power off on everything turned on the modem and router left for 10 minutes then turned on pc and it went without changin any settings at all. thanx for all the help was ready for giving up and buyin a new router :)

Re: ntl:100 modem help
 

Hooray :hyper: