![]() |
disconnections
Hi
I have been on the 2mb service for the last 2 and a bit years, i upgraded to the 10mb service last week and had no problems until today. i keep getting disconnected every minute or so for a few seconds and then it connects back again. this is a real pain when trying to download updates etc. i have tried the connection both with and without my router (see below for router model). when the disconnection happens the modem seems to reboot itself. Is it somthing that can be sorted with the help of all the wonderful people here or would i have to call cs/ts. im in the luton area with the LU4 postcode. The following was taken from the cm itself. Type : Ambit ETH/USB Combo Cable Modem Cable modem : Ambit Cable Modem MAC address : **:**:**:**:**:** IP address : **.**.**.*** Downstream Receive Power Level : 7.55 dBmv Downstream SNR : 37.15 dB Upstream Transmit Power Level : 43.00 dBmv Many thanks in advance wakar |
Re: disconnections
can we get a mod or admin in here.. to hide this guys mac and ip addy.
This will no doubt be merged into the current 10meg discussion, but to answer your question we need to know what modem you have. I personally suspect an Ambit 120 or below, in which case your going to have to get on the blower to NTL and change your modem for the new Ambit 250 as older modems are proving to be a pain in the back passage on 10meg |
Re: disconnections
eek - does this man never read these forums? Someone sort this out before he's cloned or something.
|
Re: disconnections
first of all im sorry about posing mac & ip addy didnt realise i did that.. i had been a looooong day by the time i got to post this thread.. had been up since 5am that day.. any ways back to the point.. it is an AMbit 120.
grubbymittseek - does this man never read these forums? Someone sort this out before he's cloned or something. YES i do :p: nearly every day. and thanks for the info Slyder, will have to ring them in the morning. |
Re: disconnections
Quote:
Let us know how you get on... |
Re: disconnections
just got off the phone from CS/TS engineer booked for wednesday 5-8pm.. :p: was even told that ntl ambit 120 dont support 10MB :Yikes: and that the modem would be changed.. they also requsted i wrap up old modem for an easier transfer lol
roll on wednesday |
Re: disconnections
Quote:
|
Re: disconnections
Quote:
|
Re: disconnections
Am expecting an engineer later today.. hope he turns up on time and we get this sorted with minimal of fuss, will post later on when all is done (fingers crossed)
wakar |
Re: disconnections
Hey, hoping someone will still read this post! ;p
I'm getting the identical problem to this guy. I upgraded my NTL to 10mb on Monday. Modem reset, all fine, 850k speeds, happy with, all fine throughout Tuesday as well, then suddenly since 2pm today (Wednesday) Its been resetting about every 5minutes. Does this sound like Modem being not up to it as well? Seems weird it worked fine for a couple of days. Anyway, how do i find out what model modem i have? I've looked all over and can't work it out. Sorry if its already been asked, and i hope some of you are up late ;) Ta. |
Re: disconnections
Quote:
|
Re: disconnections
Well, this is what i've got...
Model No: 60194E..... Then a load of crap, then "ntl:home 100" is the 100 what i've got? :confused: |
Re: disconnections
Quote:
|
Re: disconnections
Gah, so would you suggest ringing up first thing tommorow and asking for an engineer and specifically asking for a 250?
Depressing thing is, they probably won't even send him out to mid-next-week now its Thursday. :( Edit: didnt see the "?" yea its silver ntl home 100 |
Re: disconnections
morning all,
Got a call from the engineer at 4:38pm to say that he would be at my house at 5pm. Come 5pm true his word he turns up. I mentioned to him that CS told me to box the old one ready for replacement but he wanted to test old one. As the fiber optic cable was laying loose he connected that to his little handheld device and noticed low power levels so got up and said i might as well replace the modem. so off he went and got out a new ntl:250 modem. he ran a few test and hey presto all works fine now. Well done NTL :clap: thats 2 occasions, in nearly 3 years, i've had to have an engineer out and twice they managed to fix the problem with causing any more problems :tu: |
| All times are GMT +1. The time now is 06:44. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum