Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   Can't get to cable modem address 192.168.100.1 (https://www.cableforum.uk/board/showthread.php?t=37847)

markknell 07-11-2005 21:38

Can't get to cable modem address 192.168.100.1
 
Hi all

I'm using a Linksys router and have been able to get to 192.168.100.1 previously. I have tried restarting the modem and router but this makes no difference. Has something changed. I wanted to confirm my speed in the next few days due to the 10mb upgrades.

Any ideas? :dunce:


Mark.

MrBen 07-11-2005 21:47

Re: Can't get to cable modem address 192.168.100.1
 
Have you configured your web browser to use a proxy server? If so, remove it and try again.

Ben

markknell 07-11-2005 21:56

Re: Can't get to cable modem address 192.168.100.1
 
No, not using any proxy.

I've even checked the routing tables on the router and it says that that it sends all 192.168.0.0 packets to the wan connection.

Scopeuk 07-11-2005 22:15

Re: Can't get to cable modem address 192.168.100.1
 
what modal of modem do you have becouse there are some of the older ones dont suport web interface

markknell 07-11-2005 22:16

Re: Can't get to cable modem address 192.168.100.1
 
Sorry I should of said about that in my first post.

It's an NTL Home 120.

Scopeuk 07-11-2005 22:18

Re: Can't get to cable modem address 192.168.100.1
 
the 120 should do are you beingpresented with anythign or are you getting nothing at all

markknell 07-11-2005 22:36

Re: Can't get to cable modem address 192.168.100.1
 
No it appears to timeout.

The page cannot be displayed

The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.

Scopeuk 07-11-2005 22:39

Re: Can't get to cable modem address 192.168.100.1
 
have you tried removing the router (i know its not an ideal solution) have you got any rules (static router out bound nat ect) that may be interfearing with your access

MovedGoalPosts 07-11-2005 22:53

Re: Can't get to cable modem address 192.168.100.1
 
The IP 192.168.100.1 you have just posted, assuming you are using default Linksys router settings would be for the starting IP range of your LAN network.

Try looking at the admin pages of your router IP 192.168.1.1. From there you may be able to see the status pages that in turn will show the IP ranges being given between your router and and the modem.
__________________

As this is problem is created as a result of your network setup: Moving to Computers & IT

markknell 08-11-2005 00:04

Re: Can't get to cable modem address 192.168.100.1
 
I've done a hard reset on my router and powered off my modem again. I've picked up a completely different IP address from a different subnet altogether, maybe this was part of the problem.

For info, my old address started 80.3.0.0 and my new addess is 82.16.0.0

I can now access the modem ok. Thanks for all your suggestions.


All times are GMT +1. The time now is 20:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum