![]() |
Provisioning problems
Hi, I've just changed computer and I'm haveing probles provisioning.
I have the following: Windows XP Pro Cable through pace box connected via ethernet card When I open internet explorer I am redirected to the provisioning page. I go through the setup and name the computer. I then get the success screen instructing me to power down the computer and reset the set top box. My problem is after I have done this and restarted my computer, I am still redirected to the provisioning page again. When I start the process, the computer name I set originally is listed. If I delete this and go through the same steps when I restart everything I end up back at the provisioning page. Anyone got any ideas??? |
Re: Provisioning problems
:welcome: to the forum
try releasing and then renewing your ip address, usually works :tu: |
Re: Provisioning problems
Go into network connections in control panel,disable then re enable your local area connection.
|
Re: Provisioning problems
Tried both of these already without any success. I've even tried reconnecting using the NTL USB ethernet link. Same problem.
|
Re: Provisioning problems
Have you actually tried forcing internet explorer to another website?
Is your ip address still starting with a 10 ? |
Re: Provisioning problems
Forgive me as I'm not in front of the computer now and won't be back at it until tomorrow so this is from memory.
The IP address was a 10.56 I've tried forcing IE to a few different addresses. The right address is shown in the IE bar at the top but it's always the provisioning page that is shown. |
Re: Provisioning problems
Ok try emptying the temp internet files first,just to clear the cache of the provisioning page.
from a command screen ie start>run>cmd type the following ipconfig /release then ipconfig /renew this should drop the 10 ip and then pick up a full ip for you. |
Re: Provisioning problems
Thanks, I'll try that tomorrow
|
Re: Provisioning problems
Let us know if this gets you back online.
|
Re: Provisioning problems
Well he's disconnected the connection and reconnected, that will already release and renew the IP generally. I went round to a customer's house to install their BB for them a few weeks ago as NTL had just left em with it for them to "get on with it" and ended up having to Phone NTL as we were having the same problem with provisioning.
|
Re: Provisioning problems
Sometimes the provisioning 10 ip will jam it will have to be released by the pc first otherwise your stuck with it,by releasing and then renewing 9 times out of 10 will fix the problem.
On the odd occasion this does not work contacting tech support to rehit the stb will clear it. |
Re: Provisioning problems
I'm all sorted. Went through the whole process again today and it worked. No explanation, I assume for some reason that the provisioning IP was not clearing for some reason yesterday. Cleared first time today. Thanks for your help everybody.
|
Re: Provisioning problems
Glad your up and running,thanks for letting us know.
|
| All times are GMT. The time now is 22:33. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum