Cable Forum - Faulty Modem lead

Page 1 of 2

Show 100 post(s) from this thread on one page

Cable Forum (https://www.cableforum.uk/board/index.php)

- Internet Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=25)

- - Faulty Modem lead (https://www.cableforum.uk/board/showthread.php?t=36325)

Mike	08-10-2005 14:09

Faulty Modem lead

Hi all

My cable modem leads has an intermetent fault !

Can anyone recommend a good source to buy a replacement.

Thanks

Mike

Graham M

08-10-2005 14:17

Re: Faulty Modem lead

Which "lead"? The Coaxial or the Ethernet?

Mike	08-10-2005 15:01

Re: Faulty Modem lead

Quote:

Originally Posted by Zeph

Which "lead"? The Coaxial or the Ethernet?

It's the lead that goes from the modem to the PC. Has a sort of telephone like plug on each end.

Thanks

Mike

patrickp

08-10-2005 15:31

Re: Faulty Modem lead

That's an ethernet lead. You're looking for a cat5 lead - anywhere that does computer stuff should have them, even Dixon's etc.

Alternatively, any online supplier also should. Just try your favourite/most local.

Or just try Dabs .

Having said that, what makes you say the lead has an intermittent fault, Mike?

Mike	09-10-2005 08:36

Re: Faulty Modem lead

Quote:

Originally Posted by patrickp

Some times the connection drops...........when I wiggle the lead at the back of the modem connection comes back :dozey:

Paul K

09-10-2005 09:13

Re: Faulty Modem lead

Could be a solder joint in the modem or the lead itself cuold be faulty. Get a replacement patch cable from Maplins, Dabs, PC World, Tesco etc and see if it improves. If it doesn't improve it may be that the modem has developed a faulty connection.

Halcyon

09-10-2005 09:33

Re: Faulty Modem lead

I've always found Cableuniverse to be good.
Have a look HERE

Mike	10-10-2005 15:11

Re: Faulty Modem lead

Quote:

Originally Posted by patrickp

Is this the type I need............ETL Verified EIA/TIA-567B 2 Cat 5e UTP

thanks

Mike

patrickp

10-10-2005 17:22

Re: Faulty Modem lead

Sounds like it: that's cat5 cable. It should have RJ-45 connectors. Make sure it's a patch cable and not a crossover. That's about it.

Mike	10-10-2005 17:54

Re: Faulty Modem lead

Quote:

Originally Posted by patrickp

Sounds like it: that's cat5 cable. It should have RJ-45 connectors. Make sure it's a patch cable and not a crossover. That's about it.

Oh.......what is the difference ??

homealone

10-10-2005 18:22

Re: Faulty Modem lead

Quote:

Originally Posted by Mike

Quote:

Originally Posted by patrickp

Sounds like it: that's cat5 cable. It should have RJ-45 connectors. Make sure it's a patch cable and not a crossover. That's about it.

Oh.......what is the difference ??

patch is wired 'straight through' - i.e. in to in , out to out, crossover is wired 'crossed over', i.e. in to out & out to in (in essence)

patrickp

10-10-2005 20:24

Re: Faulty Modem lead

Thanks, Gaz! :-) And you generally use crossover cables for connecting a computer directly to another computer, and a patch cable for connecting a computer to anything else - i.e. router/switch etc.

homealone

10-10-2005 20:44

Re: Faulty Modem lead

Quote:

Originally Posted by patrickp

Thanks, Gaz! :-) And you generally use crossover cables for connecting a computer directly to another computer, and a patch cable for connecting a computer to anything else - i.e. router/switch etc.

np Patrick :) just to add that the more recent NTL cable modems can 'allegedly' (in that I havn't tried) use either a patch or a crossover cat5 cable.

patrickp

10-10-2005 22:10

Re: Faulty Modem lead

Yes, I think a lot of more modern network devices (routers, switches etc) can sense whether a cable is patch or crossover and switch connections accordingly. But

Quote:

And you generally use crossover cables for connecting a computer directly to another computer, and a patch cable for connecting a computer to anything else - i.e. router/switch etc.

has AFAIK always been the distinction.

nffc	10-10-2005 22:21

Re: Faulty Modem lead

Quote:

Originally Posted by homealone

Quote:

Originally Posted by patrickp

Thanks, Gaz! :-) And you generally use crossover cables for connecting a computer directly to another computer, and a patch cable for connecting a computer to anything else - i.e. router/switch etc.

np Patrick :) just to add that the more recent NTL cable modems can 'allegedly' (in that I havn't tried) use either a patch or a crossover cat5 cable.

They do, ours does anyway.

All times are GMT. The time now is 00:26.

Page 1 of 2

Show 100 post(s) from this thread on one page