![]() |
Network
I am trying to setup up a network between two laptops using a CAT5.
However when they are both conected it does not show up and remains disconected. I have tested both network ports with another device and they are working fine. What am i missing? PS I have also tested with two seperate cables |
Re: Network
are u using a crossover CAT5 or a straight through ?
|
Re: Network
im not too sure, on it is CAT.5 PATCH CABLE UTP
|
Re: Network
I'm guessing its a straight through cable then, in which case its the wrong cable. You will need to get hold of a crossover CAT5 in order to link the 2 laptops
|
Re: Network
i guessed so,
looking at the other one it is a CAT6 high performance. What is this CAT 5 cable for anyway? |
Re: Network
a direct connection to a device..ie network card to modem or router, where as crossovers are for linking 2 of the same devices, hub to hub, pc to pc etc
|
Re: Network
thanks alot mate,
|
Re: Network
no problem :)
|
All times are GMT +1. The time now is 22:01. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum