Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Digital cable box and audio sync problem (https://www.cableforum.uk/board/showthread.php?t=35785)

Dzachau 28-09-2005 18:20

Digital cable box and audio sync problem
 
Ihave a Hauppauge TV tuner card (350 PVR) that is hooked up via composite cables to a digital cable box. After a couple of minutes the audio and video start to go out of sync. Eventually, the picture starts to get very jerky, as if the fps drops off dramatically. The problem dissappears if I run the coaxial cable directly to my tuner card and bypass the digital cable box. The problem with audio sync is also corrected if I turn off my tuner software and then back on, but it eventually returns. I can just dump the box, but without the cable box I lose the movie channels. Can anyone tell me if there is a known fix for this problem??:confused:

patrickp 28-09-2005 18:43

Re: Digital cable box and audio sync problem
 
Unless the video and audio are actually going out of sync on your cable box, which is unlikely, I think it has to be your tuner card, Dzachau. I've had a few AIWs and VIVOs, but never a stand-alone TV card, so I don't know much about them. Perhaps someone here has experience of this issue and can help?

Otherwise, I'd suggest, first, visiting Hauppauge's site and seeing if there's any reference to problems like this in their support section, and also see if they host any forums. Commonly, problems like this can be features of particular drivers, or may need updates to your sytem. It's possible, particularly with composite or s- video, that better quality cables could help.

If you don't have any luck here, or if you do but want to check it out further, I would have thought you'd be able to find Hauppage group(s) (they're a very well known brand) on Usenet.

homealone 28-09-2005 18:57

Re: Digital cable box and audio sync problem
 
from http://www.hauppauge.com/pages/faq/s..._eskape.html#2

Quote:

I've noticed that lip-sync is off if I run my monitor at a resolution higher than 640 x 480 and play MyTV in Full Screen mode.

Depending on the speed of your system and the graphics accelerator (built-in or 3rd party) you may notice lip-sync being off. This has to due with non-linear video scaling. The best way to insure accurate lip-sync is to play MyTV so the graphics accelerator isn't asked to perform non-linear interpolation. To do this, play MyTV at ½, Normal or Double resolution; and if playing Full Screen, by setting your desktop resolution to 640x480.

How do I set my system to get the best frame rate and lip-sync performance?

1. Turn Virtual memory off.
2. Turn File Sharing off.
3. Turn Apple Talk off.
4. Run in Thousands color mode.
5. Play TV in one of the preset window sizes (1/2, Normal or Double); or if playing Full Screen - set your desktop resolution to 640x48.
6. If your system has advance settings in the Energy Saver Control Panel, make sure "Allow process cycling" check box is NOT check.
dunno if any of that is relevant for you?

:welcome: to Cable Forum, btw :)

Dzachau 29-09-2005 03:08

Re: Digital cable box and audio sync problem
 
Thanks much! This forum is very responsive and helpful!! I will try the suggestions mentioned in your post. ;)


All times are GMT. The time now is 08:15.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum