![]() |
ntl Home Networking
Hi,
I have searched the forums for any advice on this and just want to check whether the following would allow me to have two computers connected to the internet and share files and printers
So, Do I need ICS installed? If so, how can I stop the error appearing Is the equipment listed above enough to have 2 PC's on the net sharing files and printers? Thanks, Robbie Gray:tu: |
Re: ntl Home Networking
:welcome: to CableForum.
|
Re: ntl Home Networking
Yes both routers will work fine.
Don't think you need ICS installed You'd be able to share between the PCs as long as the domain/workgroup were both the same and you'd both be able to access the net if it set up right. Looks ok to me although I'd wireless it meself, you'd need new cards for the PCs though. |
Re: ntl Home Networking
As this is not strictly an NTL problem, I have moved it to the Computers and IT forum.
|
Re: ntl Home Networking
The router you linked to is fine for NTL BB and should come with at least one patch cable. You will need another for the second PC though, not expensive to buy fortunately.
ICS isn't needed if you move to a router as far as I know as it's for Internet Connection Sharing which the router will handle instead of one of the PCs. Have you tried removing your network adaptor from your hardware profile and rebooting to see if it rebuilds the connection to ICS? Post the full error message and we can try and help out with it if you want. Sharing files and printer should be possible as long as you make sure the PCs can see each other on your network and that the files and printer in question are shared. |
Re: ntl Home Networking
Thanks for the fast replies and the welcome Stuart. Thanks for your help also nffc and Paul.
Click here to view an image of the error message :) |
Re: ntl Home Networking
You don't need ICS with a router because the router IS the ICS. Wouldn't worry.
|
All times are GMT +1. The time now is 15:28. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum