Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Reducing hard drive noise (https://www.cableforum.uk/board/showthread.php?t=34054)

Tristan 24-08-2005 21:10

Reducing hard drive noise
 
I remember reading in the past about little DOS programmes that were available which would set hard drives to a "low noise" setting, at the expense of seek times. I've got a couple of old ATA drives that are I'd like to quieten down -- does anybody know where I could get such programmes?

The harddrives in question are an 80GB IBM Deskstar and a 20GB Maxtor.

Thanks!

LemonyBrainAid 24-08-2005 21:31

Re: Reducing hard drive noise
 
This isn't answering your question, but I've found you can reduce hard drive sound by suspending and sandwiching the actual hard drive yourself -

http://www.silentpcreview.com/module...artid=8&page=1

Just found it on the web, thought it might help :)

Keytops 24-08-2005 22:02

Re: Reducing hard drive noise
 
Dunno about Maxtor, but the IBM (now Hitachi) Deskstar Feature Tool is available here http://www.hgst.com/hdd/support/download.htm
Quote:

The Feature Tool allows you to:
  • Enable or disable the read-ahead or write cache.
  • Change the drive Automatic Acoustic Management settings to the:
    • Lowest acoustic emanation setting (Quiet Seek Mode), or
    • Maximum performance level (Normal Seek Mode).
  • Change the predefined capacity of the drive. ....


altis 24-08-2005 22:03

Re: Reducing hard drive noise
 
For the IBM try the Feature Tool here:
http://www.hgst.com/hdd/support/download.htm#Optimize

Maxtor don't seem to have an equivalent:
http://www.maxtor.com/portal/site/Ma...re%20Downloads

Edit
Bugger - spent too long wandering around the Maxtor site!


All times are GMT. The time now is 11:24.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum