Samsung SL-C410w Laser Printer Issue
 

Hi Guys i wonder if u can help me out.

Today i did a firmware update on the above printer as i was having a few issues wireless printing which the firmware update was meant to have sorted.

Since then the printer will not boot, all i get is 3 flashing lights on the top and thats it, i tried to do a reflash of the firmware and it says its fully upto date.

Anyone have any ideas what i can try?

Thanks.

Re: Samsung SL-C410w Laser Printer Issue
 

I'm guessing you flashed the firmware over a wireless connection. you should never do that you may have bricked it.

Try disconnecting the power supply, hold the start button down for 30 seconds reconnect and reboot.

Re: Samsung SL-C410w Laser Printer Issue
 

Nope it was flashed via a USB Cable and laptop thats whats weird about it.

Re: Samsung SL-C410w Laser Printer Issue
 

Can you contact Samsung support online or does it have a troubleshooting guide in the manual?

Re: Samsung SL-C410w Laser Printer Issue
 

Samsung Printers are now owned by HP and i've never had any luck with HP.

Re: Samsung SL-C410w Laser Printer Issue
 

Can you not access the printer via it web interface?

I did this with my HP printer, it told me loads of stuff, like toner left, pages printed etc

---------- Post added at 18:36 ---------- Previous post was at 18:30 ----------

I'm still trying to set my Laser Printer to Stun :D

Re: Samsung SL-C410w Laser Printer Issue
 

Hom3r good call, its all up and running again thanks.

One word of advice for anyone wanting to flash firmware to a Samsung Printer, don't use the exe file that comes with the printer but instead log into the printer settings and use the built in firmware upgrade wizard.

Re: Samsung SL-C410w Laser Printer Issue
 

I would have thought that was a given.

Re: Samsung SL-C410w Laser Printer Issue
 

Pip, nope if u follow the instructions given by Samsung u use the exe file that comes with the flash and flash it that way and it bricked my printer.