Can't access GUI
 

Trying 192.168.0.1 and I get "the web page isn't available."

I am in modem mode, with a router attached.

I'm being dull I expect but how can I access settings?

Thanks

Re: Can't access GUI
 

192.168.100.1

Re: Can't access GUI
 

Thanks.

My wireless signal is still guff. I need to get a superhub 2. Or another provider.

Re: Can't access GUI
 

Or your own router.

Re: Can't access GUI
 

Got one of those. Paid £110 for it, and I don't get wireless 10 metres away from it.

Re: Can't access GUI
 

What did you get? I'd be extremely surprised if your router is inferior to the SH1, plus it also implies that your issue is environmental and a SH2 won't help much.

Re: Can't access GUI
 

Asus rt n66u. Latest Melrin firmware.

There are other threads on this, so apologies if I'm clogging up the board, but I refuse to believe that a mid terrace house has too much going on to get a decent signal from one room to the next. I can live with 20Mb for most of my devices. It's just the downloading speed that suffers.

I have to take the laptop from one part of the house abd sit it next to the router if I want to downlad somethign at the speed I pay for.

Re: Can't access GUI
 

I does depend on what the internal walls are made of. Our being a Victorian terrace just has one brick thickness on the internal walls plus the plaster. This comes to being 5 inches thick. I know some modern walls have metallic insulation on the internal walls and that would really screw the wifi. I can get 2.5 GHZ reception reasonably well 60 feet away at the bottom of the garden but 5GhZ cant get through 2 walls to the garden.

This is an ASUS RT-AC66U running Merlin. As an example in the same room my Samsung S5 gets 160Mbit/sec.

Re: Can't access GUI
 

Probably got chicken wire in me walls.

Re: Can't access GUI
 

Sounds like you need 1 of these! :D

http://www.cableforum.co.uk/board/at...1&d=1441276500

Re: Can't access GUI
 

How would that help?

Re: Can't access GUI
 

That is a very decent router, which implies that the issue is local to yourself. What I'm saying is, a SH2 isn't going to fix your problem. Have you tried using Wifi-analyser (Android app) to see what's going on around you? Also have you created a separate network for 5Ghz to ensure you're connecting to that? If there is wireless congestion, switching to 5Ghz can be a good place to start.

Re: Can't access GUI
 

Yes. Very little. 1 other network from a neighbour with faint signal. I have the channel selected to Auto

I have both 2.4 and 5 Ghz networks. The 5Ghz works well from about 4 metres away from the router, then is no better than the 2.4Ghz signal elsewhere. It's next to useless though as I don't have anyd evices 4 m away from the router.

As mentioned in another thread, when I test speed with my S3 smartphone, the maximum I get is 35Mb/s. Yet I did the same at a mate's house and I got 70Mb/s on his superhub2.

Tonight, I am going to try using superhub only. No modem mode. If I still get 1/5th of what I am paying for then I am going to ring retentions. The problem simply can't be "my house". Can it?

Re: Can't access GUI
 

Wireless uses unlicensed spectrum. It could be anything. VM have no control over it and no obligation to do anything about it.

Re: Can't access GUI
 

Sure. But anoher company might be willing to help me a bit more. All I have got so far is Indian people hanging up on me.