Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Science & Technology (https://www.cableforum.uk/board/forumdisplay.php?f=26)
-   -   bush hdmi colour pinout (https://www.cableforum.uk/board/showthread.php?t=33691077)

jamieas05 10-12-2012 10:03

bush hdmi colour pinout
 
Hi can someone please help.
I need to find out the colour code pinout colour for a 5m bush HDMI cable. i have bought a screw terminal module but need to know the colour to number(letter) code.
I have just installed a new HDMI cable inside the walls and decorated, and attached my tv. Everything worked fine until i took the tv off the wall and ripped the end off the cable!

Any info would be kindly received.
Thanks

multiskilled 10-12-2012 18:42

Re: bush hdmi colour pinout
 
The way to do it would be to do a continuity test using a multi meter from the good end and put that wire in corresponding pin of the terminal. Here's a link to pin numbers.

http://www.lammertbies.nl/comm/cable/HDMI.html

Be warned though if you get it wrong you could damage your tv and or any other connected device.

My advice would be if your not sure replace the cable even if it's a pain. It could be cheaper in the long run

qasdfdsaq 11-12-2012 15:34

Re: bush hdmi colour pinout
 
Indeed, cables are cheap.

jamieas05 11-12-2012 15:43

Re: bush hdmi colour pinout
 
Quote:

Originally Posted by multiskilled (Post 35509616)
The way to do it would be to do a continuity test using a multi meter from the good end and put that wire in corresponding pin of the terminal. Here's a link to pin numbers.

http://www.lammertbies.nl/comm/cable/HDMI.html

Be warned though if you get it wrong you could damage your tv and or any other connected device.

My advice would be if your not sure replace the cable even if it's a pain. It could be cheaper in the long run



---------- Post added at 15:43 ---------- Previous post was at 15:39 ----------

Thanks for the advice.
Ive cut the cable and took apart the male connector to see what wires go where.
Ive screwed them in the same places in the screw terminal module, but it still doesn't work!
Any ideas?...............Anyone?

multiskilled 11-12-2012 23:24

Re: bush hdmi colour pinout
 
Have you got another hdmi cable? Use that to check you haven't damaged the input on your tv. Then bite the bullet and buy a new 5 metre cable as the cable you have damaged is probably not repairable.

When you cut out the old cable from the wall put some conduit in to run the cable through, so if you need to replace it you can just pull the new one through without having to chase the wall again.


All times are GMT. The time now is 08:40.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum