Had tivo installed and additional box, HUB levels all ok?
 

found things not so responsive and wondering if everything been set up ok.

Downstream DS-1 DS-2 DS-3 DS-4 DS-5 DS-6 DS-7 DS-8
Frequency (Hz) 315000000 Hz 291000000 Hz 299000000 Hz 307000000 Hz N/A N/A N/A N/A
Lock Status(QAM Lock/FEC Sync/MPEG Lock) Locked Locked Locked Locked N/A N/A N/A N/A
Channel ID 212 209 210 211 N/A N/A N/A N/A
Modulation QAM256 QAM256 QAM256 QAM256 N/A N/A N/A N/A
Symbol Rate (Msym/sec) 6.952000 6.952000 6.952000 6.952000 N/A N/A N/A N/A
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 N/A N/A N/A N/A
Power Level (dBmV) -0.2 dBmV 1.2 dBmV 0.8 dBmV 0.8 dBmV N/A N/A N/A N/A
RxMER (dB) 41.4 dB 41.9 dB 41.9 dB 41.9 dB N/A N/A N/A N/A


US-1 US-2 US-3 US-4
Channel Type 2.0 N/A N/A N/A
Channel ID 4 N/A N/A N/A
Frequency (Hz) 35800000 Hz N/A N/A N/A
Ranging Status Success N/A N/A N/A
Modulation QAM16 N/A N/A N/A
Symbol Rate (Sym/sec) 5120000 N/A N/A N/A
Mini-Slot Size 128 N/A N/A N/A
Power Level (dBmV) 48.3 dBmV N/A N/A N/A
T1 Timeouts 0 N/A N/A N/A
T2 Timeouts 0 N/A N/A N/A
T3 Timeouts 0 N/A N/A N/A
T4 Timeouts 0 N/A



Network Access Allowed
Maximum Number of CPEs 1
Baseline Privacy Enabled
DOCSIS Mode EU DOCSIS 3.0
Config File
Primary Downstream Service Flow SFID 10748
Max Traffic Rate 110000000 bps
Max Traffic Burst 10000 bytes
Min Traffic Rate 0 bps
Primary Upstream Service Flow SFID 10747
Max Traffic Rate 10250000 bps
Max Traffic Burst 16320 bytes
Min Traffic Rate 0 bps
Max Concatenated Burst 16320 bps
Scheduling Type BestEffort


ive started my TBB monitor so will see whats happening, also the forward 3db attenuator connector to the superhub has been removed, was that needed or everything looking ok?

Re: Had tivo installed and additional box, HUB levels all ok?
 

Your levels look OK provided that the upstream is stable at 48 dBmv and moving towards 55 dBmv.

If they added a splitter to your in-house kit, that would explain the additional attenuation and why you would want to remove the FPA.

Presumably you were on 100/10 before the Tivo went in? The TV frequencies don't clash with broadband so sluggishness is usually down to contention on the broadband frequencies.

Re: Had tivo installed and additional box, HUB levels all ok?
 

Sometimes VIP they put the full 100meg code on the system

Re: Had tivo installed and additional box, HUB levels all ok?
 

Yeah was 100mb/10mb before it went in, in regards to upstream power levels, should I be worried or shall I get a technical out to adjust something? Also shall I reconnect the fpa 3db and post superhub stats again to see if that effects the upload power levels.

Re: Had tivo installed and additional box, HUB levels all ok?
 

levels are perfect

Re: Had tivo installed and additional box, HUB levels all ok?
 

... as long as the upstream power is stable.