Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media TV Service (https://www.cableforum.uk/board/forumdisplay.php?f=11)
-   -   V+ : scart lead (https://www.cableforum.uk/board/showthread.php?t=33689314)

praxis 19-08-2012 16:45

scart lead
 
do gold plated scart leads make a noticeable difference to picture quality ?

jb66 19-08-2012 17:08

Re: scart lead
 
No, a very minor difference

Taf 19-08-2012 17:43

Re: scart lead
 
AFAIC they only make a difference to your bank balance.

dwarfofpoison 19-08-2012 18:25

Re: scart lead
 
Quote:

Originally Posted by praxis (Post 35464951)
do gold plated scart leads make a noticeable difference to picture quality ?

Over the years this has been a widely debated issue and I feel the bottom line is as jb66 says. There are valid arguments about not using cheap pound land leads but if the lead is of a good shielded quality you will be very hard pushed to notice any difference whether it is gold plated or not.

Gold plating doesn't make a lead instantly good quality, if a lead is very expensive that too doesn't instantly make it good quality.

However I've got gold plated leads and can I tell the difference between them and the nickel ones supplied by Virgin Media? Honestly, no but I feel better!

praxis 19-08-2012 20:58

Re: scart lead
 
Quote:

Originally Posted by dwarfofpoison (Post 35465008)
Over the years this has been a widely debated issue and I feel the bottom line is as jb66 says. There are valid arguments about not using cheap pound land leads but if the lead is of a good shielded quality you will be very hard pushed to notice any difference whether it is gold plated or not.

Gold plating doesn't make a lead instantly good quality, if a lead is very expensive that too doesn't instantly make it good quality.

However I've got gold plated leads and can I tell the difference between them and the nickel ones supplied by Virgin Media? Honestly, no but I feel better!

So based on that any suggestions for better quality recordings to my Dvd recorder ? I have tried disabling HDMI.Going with scart only and TBH the quality is not what i would like it to be.I am using Panasonic Dvd-Ram discs in a Panasonic DMR-EZ28 recorder ?

dwarfofpoison 19-08-2012 21:38

Re: scart lead
 
Quote:

Originally Posted by praxis (Post 35465082)
So based on that any suggestions for better quality recordings to my Dvd recorder ? I have tried disabling HDMI.Going with scart only and TBH the quality is not what i would like it to be.I am using Panasonic Dvd-Ram discs in a Panasonic DMR-EZ28 recorder ?

I'm not an expert but with my limited knowledge, your posts leave me puzzled.

The picture quality via HDMI is far superior than what can be achaived via a scart connection. As far as I can see your Panasonic DMR-EZ28 recorder accepts HDMI so I'm confused as to why you are hoping for better quality recordings over scart.

My Sony DVD recorder is old and only accepts a scart connection so I know in advance the picture quality on the recordings ain't going to win awards!

mhatter67 19-08-2012 22:02

Re: scart lead
 
You cannot use HDMI as a record cable it is output only to the TV, this is the first DVD recorded I have seem that does not have scart inputs or outputs on it!

dwarfofpoison 20-08-2012 02:01

Re: scart lead
 
Quote:

Originally Posted by mhatter67 (Post 35465111)
You cannot use HDMI as a record cable it is output only to the TV

Yep you're absolutely right, my bad. I had to read up and it turns out that it's a HDCP legal thing that recorders are only allowed to output HDMI and not have HDMI inputs. Just shows me that I shouldn't get myself involved in conversations where the breadth of my knowledge isn't up to it! :confused:

progers 20-08-2012 08:28

Re: scart lead
 
That's really odd then; my Sony DVD recorder is connected to my AV system by HDMI cable only and records perfectly

spiderplant 20-08-2012 19:20

Re: scart lead
 
Quote:

Originally Posted by praxis (Post 35465082)
So based on that any suggestions for better quality recordings to my Dvd recorder ? I have tried disabling HDMI.Going with scart only and TBH the quality is not what i would like it to be.I am using Panasonic Dvd-Ram discs in a Panasonic DMR-EZ28 recorder ?

According to this site your DVD-R supports RGB input on SCART #2. So if you set the V+ output to SCART/RGB, and connect the TV SCART socket on the V+ to SCART #2 on the DVD-R, this should give you the best quality. You may need to go into the DVD-R menus to set it to RGB input mode.


All times are GMT. The time now is 02:59.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum