![]() |
problems since the new firmware release - only today
Since the new firmware release (which the superhub did automatically) everything has been working fine.
however in the last 30 minutes I have noticed that certain website have been chronically slow to access (including this one) seems fine at the moment. I switched my hub off and back on again and it took a good few minutes to allow me access again to the internet and I have now noticed that my traffic light, which was normal blue, is now green :confused: When I access the superhub also I get an expiry date :confused: Quote:
I checked the service problem page on Virgin and noticed that there is no problem with my broadband in the area but there does seem to be a problem with the TV (which I don't have) and that a engineer is on site and is expected to be sorted by tomorrow afternoon. Surely that wouldn't scramble up my internet connection? here are my figures: Downstream Channels Lock Status Channel ID Frequency Modulation Rx Power SNR Pre RS Errors Post RS Errors Locked 55 323000000 Hz QAM256 -3.7 dBmV 40.4 dB 41381 12313 Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Upstream Channels Lock Status Channel ID Frequency Modulation Tx Power Mode Channel Bandwidth Symbol Rate Locked 4 35800000 Hz ATDMA 46.0 dBmV 16QAM 6400000 20480 Kbits/sec Unlocked 0 0 Hz Unknown 0.0 dBmV Unknown Unknown 0 Kbits/sec Unlocked 0 0 Hz Unknown 0.0 dBmV Unknown Unknown 0 Kbits/sec Unlocked 0 0 Hz Unknown 0.0 dBmV Unknown Unknown 0 Kbits/sec I can't access speedtest either as it just times out. ---------- Post added at 18:59 ---------- Previous post was at 18:50 ---------- Got this private message on the Virgin forum also I have checked your connection and the downstream power level is unacceptably high. We will need to arrange an engineer visit to adjust the power levels. |
Re: problems since the new firmware release - only today
internet is slow and for me this evening for some web pages from time to time(including the forum here) but no any strange information to my SH status
I am guessing after the firmware may trying to lock at different channels id so or give one more reboot to find one more faster ...or you may need wait for the modem to lock what ever time will be ready about the message with expire date, it may reset it self or reboot at that time if is not bug If you don't have a any special settings in the SH i would say to try one reset from the back of the SH with a small pin |
Re: problems since the new firmware release - only today
Here in Leeds certain websites are not available, those that are inc here are very slow.
Using ambit 256 on 20meg, strange thing is though all speed tests report spot on. Could be Leeds having probs (for me) or work in progress. |
Re: problems since the new firmware release - only today
Quote:
The stats look very wrong - Only one downstream channel? Aren't you on the 50Mb/s service? |
Re: problems since the new firmware release - only today
my internet is also very slow with some sites not loading, why is this happening?
|
Re: problems since the new firmware release - only today
Quote:
I got a PM on the Virgin Forum regarding another issue and got this response: Quote:
|
Re: problems since the new firmware release - only today
Having problems here in Stoke on Trent some site ok others slow or dont load.
|
Re: problems since the new firmware release - only today
Mine was very bad for the last 30 minutes or so but has just improved drastically
|
Re: problems since the new firmware release - only today
same here been down for the past hour rebooted superhub a few times on the phone to vm at the moment and been on hold for the past 30 mins
all seems to be back up now I am in Batley West Yorkshire area |
Re: problems since the new firmware release - only today
Quote:
I'm in Camelon, Central Scotland and when I phoned up the automated voice said there was a problem in Livingston which is about 30 miles away, don't know if that is the main hub. |
Re: problems since the new firmware release - only today
Quote:
it happened to me one time and was waiting more than 30min to get blue light when had many T3 errors in sort time Back to blue light should have access now can you post the stats if channels are the same and how is the downstream levels? Also reply to that private message for the engineer visit |
Re: problems since the new firmware release - only today
Quote:
|
Re: problems since the new firmware release - only today
after resetting my hub I have since checked my connections and got these results
Downstream Channels Lock Status Channel ID Frequency Modulation Rx Power SNR Pre RS Errors Post RS Errors Locked 55 323000000 Hz QAM256 -3.6 dBmV 40.4 dB 21 0 Locked 49 291000000 Hz QAM256 -3.7 dBmV 39.6 dB 47 0 Locked 50 299000000 Hz QAM256 -3.4 dBmV 39.9 dB 54 0 Locked 53 307000000 Hz QAM256 -3.9 dBmV 39.4 dB 78 0 Locked 54 315000000 Hz QAM256 -3.7 dBmV 39.9 dB 81 0 Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Unlocked Unknown 0 Hz Unknown 0.0 dBmV 0.0 dB Unknown Unknown Upstream Channels Lock Status Channel ID Frequency Modulation Tx Power Mode Channel Bandwidth Symbol Rate Locked 4 35800000 Hz ATDMA 46.3 dBmV 16QAM 6400000 20480 Kbits/sec Unlocked 0 0 Hz Unknown 0.0 dBmV Unknown Unknown 0 Kbits/sec Unlocked 0 0 Hz Unknown 0.0 dBmV Unknown Unknown 0 Kbits/sec Unlocked 0 0 Hz Unknown 0.0 dBmV Unknown Unknown 0 Kbits/sec |
Re: problems since the new firmware release - only today
Quote:
|
Re: problems since the new firmware release - only today
Quote:
how do they look? |
| All times are GMT +1. The time now is 11:34. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum