Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Science & Technology (https://www.cableforum.uk/board/forumdisplay.php?f=26)
-   -   Correct power supply for this.... (https://www.cableforum.uk/board/showthread.php?t=33686199)

dilli-theclaw 09-03-2012 16:27

Correct power supply for this....
 
As some of you may have spotted I was given this recently

http://www.sensorytools.com/eureka.htm

Which is great BUT didn't come with a PSU.

Natalie tells me that it has 9v input and also has 800mA written on the back.

I also know the connector is centre positive.

I am trying to find a cheap power supply from somewhere like ebay but I'm not sure which one will do the job. Can I get a 1a one or will that toast it?

Any suggestions would be appreciated.

Cheers - Dilli.

Derek 09-03-2012 16:43

Re: Correct power supply for this....
 
From memory if the volts are the same a higher amperage supply should be fine as the machine will only draw what it needs.

I certainly use higher amp rating PSUs in some work stuff from time to time.

Graham M 09-03-2012 17:01

Re: Correct power supply for this....
 
As long as the volts are the same, the current doesn't matter as long as it's the same or higher as the device will only draw the current it requires.

dilli-theclaw 09-03-2012 20:03

Re: Correct power supply for this....
 
Thank you :)

---------- Post added at 20:03 ---------- Previous post was at 18:19 ----------

I was able to test with my belkin gigabit switch power supply :)

(see happy thoughts thread for result).

Cheers all - a very happy Dilli.


All times are GMT. The time now is 04:48.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum