![]() |
superhub settings
Hi
During the day my speed is close to 50Mb,but during the evenings is drops to about 5-10 Mb. I have copied my superhub settings for when the speed is 50Mb. Are there any issues,I will also include the superhub settings if applicable when the speed drops. Connection Connection ________________________________________ Startup Procedure Procedure Status Comment Acquire Downstream Channel 299000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ Downstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked Locked QAM256 33 55616000 Kbits/sec 299000000 Hz 8.3 dBmV 45.4 dB Hybrid Locked QAM256 32 55616000 Kbits/sec 291000000 Hz 8.2 dBmV 44.7 dB Hybrid Locked QAM256 34 55616000 Kbits/sec 307000000 Hz 8.3 dBmV 44.6 dB Hybrid Locked QAM256 35 55616000 Kbits/sec 315000000 Hz 8.0 dBmV 44.4 dB Hybrid Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown ________________________________________ Upstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power Locked TDMA 1 10240 Kbits/sec 25800000 Hz 45.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV ________________________________________ Primary Downstream Service Flow Downstream(0) SFID 2149 Max Traffic Rate 53000000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps Primary Downstream Service Flow Downstream(0) SFID 2149 Max Traffic Rate 53000000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps ________________________________________ Primary Upstream Service Flow Upstream(0) SFID 2148 Max Traffic Rate 1750000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 1522 bytes Scheduling Type Best Effort Below is the settings for tonight where my speed is 9Mb Startup Procedure Procedure Status Comment Acquire Downstream Channel 299000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ Downstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked Locked QAM256 33 55616000 Kbits/sec 299000000 Hz 8.7 dBmV 44.9 dB Hybrid Locked QAM256 32 55616000 Kbits/sec 291000000 Hz 8.8 dBmV 44.8 dB Hybrid Locked QAM256 34 55616000 Kbits/sec 307000000 Hz 8.7 dBmV 44.5 dB Hybrid Locked QAM256 35 55616000 Kbits/sec 315000000 Hz 8.4 dBmV 44.2 dB Hybrid Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown Upstream Channels Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power Locked TDMA 1 10240 Kbits/sec 25800000 Hz 45.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV Primary Downstream Service Flow Downstream(0) SFID 2149 Max Traffic Rate 53000000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps Primary Upstream Service Flow Upstream(0) SFID 2148 Max Traffic Rate 1750000 bps Max Traffic Burst 3044 bytes Mix Traffic Rate 0 bps Max Concatenated Burst 1522 bytes Scheduling Type Best Effort Current System Time:Sun Nov 06 21:21:29 2011 ---------- Post added at 21:25 ---------- Previous post was at 21:22 ---------- Hi, Also please see event log Sat Oct 29 08:13:12 2011 Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=a0:21:b7:2d:7b:c8;CMTS-MAC=00:21:d8:d1:6b:b2;CM-QOS=1.1;CM-VER=3.0; Event log TimePriorityDescription Sat Oct 29 08:13:12 2011 Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; Fri Oct 28 08:33:36 2011 Critical (3) DHCP FAILED - Requested Info not supported.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; Fri Oct 28 08:33:31 2011 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.0;CM-VER=3.0; Time Not Established Critical (3) DHCP FAILED - Requested Info not supported.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.0;CM-VER=3.0; Time Not Established Critical (3) DHCP FAILED - Request sent, No response;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.0;CM-VER=3.0; Time Not Established Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.0;CM-VER=3.0; Time Not Established Critical (3) DHCP FAILED - Requested Info not supported.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.0;CM-VER=3.0; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire FEC framing;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.0;CM-VER=3.0; ---------- Post added at 21:26 ---------- Previous post was at 21:25 ---------- Hi, Please any help is appreciated . Thank you all Regards,Mike |
Re: superhub settings
those sort of errors should result in loss of a connection, not it slowing down. Anyways, the only thing I would say about your power levels is that your downstream power is a tad high but if you are achieving full speed on it then it is probs ok. I get my full speed most of the time although it drops to 35mbit in the evenings and normally 20 ish over the weekend. It doesnt mean anything is wrong, it is just that the network is busy. You may be in an even more over subscribed area than me which is why you are noticing more of a significant decrease in speed. If you had any probs with your connection, especially your power levels, it would affect you all the time and not just during peak periods :)
|
Re: superhub settings
Thanks for the help,thats what Im thinking,but I never had this problem with 20Mb?
Cheers |
All times are GMT +1. The time now is 15:04. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum