Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Science & Technology (https://www.cableforum.uk/board/forumdisplay.php?f=26)
-   -   Aerial Connection (https://www.cableforum.uk/board/showthread.php?t=33680654)

LSainsbury 26-08-2011 09:31

Aerial Connection
 
Hi,

Stupid question: How do you connect coax to an outside aerial?

I want to make a 2nd feed from an aerial but I've not got access to it you to discover how the coax connects and what the termination is like.

Everything I've looked at so far just tell you how to wire a coax connector but thats not what I need!!

Chris 26-08-2011 09:57

Re: Aerial Connection
 
You would not normally plan to do it that way - a single cable should come down from the aerial, indoors as soon as possible and plugged into a distribution amplifier. You then run multiple cables from there to wherever you need them.

Taf 26-08-2011 09:57

Re: Aerial Connection
 
Do you want to make a connection at the dipole end up on the roof or inside the house?

A simple aerial splitter will do the job indoors, but a better job would be done by an aerial amplifier/splitter.

http://www.ricability-digitaltv.org....s/Splitter.jpg

http://www.wickes.co.uk/invt/204699

LSainsbury 26-08-2011 13:45

Re: Aerial Connection
 
Quote:

Originally Posted by Chris (Post 35292591)
You would not normally plan to do it that way - a single cable should come down from the aerial, indoors as soon as possible and plugged into a distribution amplifier. You then run multiple cables from there to wherever you need them.


Ah yeah - of course - that would be much more simple!

Taf 26-08-2011 14:22

Re: Aerial Connection
 
I have a 6 way amp in the attic fed by a spur from the upstairs lighting circuit.

Dai 26-08-2011 15:51

Re: Aerial Connection
 
Quote:

Originally Posted by Taf (Post 35292682)
I have a 6 way amp in the attic fed by a spur from the upstairs lighting circuit.

Similar setup here. Once that's in place it's relatively easy to drop coax to each room requiring a feed. And no ladders required, which is nice.


All times are GMT. The time now is 10:43.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum