V+ Code for LG Pk350
 

After months of trying:dunce: i have now found the Virgin+ code to enable volume control on a V+ control for LG 50" PK350 = 1 7 6 8

➊ Press *(STAR) + and TV together on the remote for a few seconds until the TV light on the remote flashes twice

➋ Slowly enter digits 1768 the remote light will flash twice again

➌ Point the remote at your set-top box and test the volume buttons.

Hope this is of help to someone.:)

Re: V+ Code for LG Pk350
 

Hi deansn1 and welcome to the forum. Thank you for the very helpful first post, these codes can be a real pain to track down so I am sure the information will come in useful.

Re: V+ Code for LG Pk350
 

Does anyone know if the four digit volume code is still available that can be used if all the other TV codes fail. I think it operates the STB (or used to) and started with the number six. Or has the recent update/s where all the menu's etc were changed had anything to do with it. I've just changed TV's and would like to carry on using the same volume set up as before but can't seem to find the code anywhere.

Thanks.

Re: V+ Code for LG Pk350
 

Now that takes me back in time it must be at least 2 years since that came up. :)

0683 used to control the V+ own audio controls when you only used a scart connection but didn't work when HDMI was selected could this be the code you remember?

Re: V+ Code for LG Pk350
 

Yes you're right joglynne about it only working through the scart, but like I said I'm sure it started with the No'6. Whatever the code is though do you know if it can still be used?

Cheers.

---------- Post added at 21:04 ---------- Previous post was at 20:16 ----------

I don't know where I got my four digits from but I've just got round to trying the 0683 code that you suggested and it's bang on so can't thank you enough.

Thanks again.

Re: V+ Code for LG Pk350
 

You're welcome Rivva, it's good to find that my old grey cells are still working. :D

Re: V+ Code for LG Pk350
 

I know this is a long shot, but does anyone know if there is a similar code for TiVo? The TiVo is connected to my telly using a HDMI cable, but I would like to use and control audio volume using the optical output to a set of active monitors. (these do not have remote volume control)