Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   General IT Discussion (https://www.cableforum.uk/board/forumdisplay.php?f=19)
-   -   Test memory software . (https://www.cableforum.uk/board/showthread.php?t=33676430)

Quam256 03-04-2011 09:19

Test memory software .
 
I think one of my memory sticks is faulty but would like to be sure before I buy some more .
I have found Memtest 86 but was wondering if there were any more out there that I could try

Kymmy 03-04-2011 10:37

Re: Test memory software .
 
memtest is one of the standards these days, what does memtest say about it?

Quam256 03-04-2011 10:47

Re: Test memory software .
 
I havnt run it yet ,wanted to see what other options I had.

Kymmy 03-04-2011 10:52

Re: Test memory software .
 
They'll all do the same tests and tell you the same thing ;) Just stick with memtest :p:

Quam256 03-04-2011 11:13

Re: Test memory software .
 
Quote:

Originally Posted by Kymmy (Post 35205109)
They'll all do the same tests and tell you the same thing ;) Just stick with memtest :p:


Thanks ,will come back with the results later. :)

Web-Junkie 03-04-2011 17:43

Re: Test memory software .
 
There's also Memtest86+, based on the original Memtest86, that you could also use!

Welshchris 04-04-2011 13:37

Re: Test memory software .
 
i use Memtest86. Let it do a few passes tho as a problem may not show up on the first pass.

Zing 04-04-2011 13:56

Re: Test memory software .
 
a problem might not show up for a long time.

Ive run memtest overnight and had a single fail 6 hours in.

Also even if memtest does not show up a fault it does not mean its not faulty

Also if memtest does show up a fault then there are steps you can take. Firstly drop the memory speed ( as a rule nowadays there will be a step inline with the fsb without having to lose CPU clocks) then slacken the timings. You might find your ram will run fine a couple of hundred mhz lower

---------- Post added at 13:56 ---------- Previous post was at 13:54 ----------

also make sure the vdimm valtage is what the ram is specced for if its performance ram it may need higher voltage


All times are GMT. The time now is 11:24.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum